Study of Parameters Composites Micro-drilling Process
碩士 === 建國科技大學 === 機械工程系暨製造科技研究所 === 101 === The purpose of this study for the main parts of a probe card the probe board (composites) UC type 0.2mm bur micro-drilling burr amount minimization studies using the Taguchi method for experimental design factor levels, bychange the rotational speed, feed,...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2013
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/35451566094711036829 |
| Summary: | 碩士 === 建國科技大學 === 機械工程系暨製造科技研究所 === 101 === The purpose of this study for the main parts of a probe card the probe board (composites) UC type 0.2mm bur micro-drilling burr amount minimization studies using the Taguchi method for experimental design factor levels, bychange the rotational speed, feed, each knife of the cutting depth to improve the burr amount of experimental the reaction table data by Taguchi method L9 orthogonal array S / N ratio learned that the best combination of parameters speed S20000rpm in feed F500mm/min, each knife deep Q0.06 mm up to micro-drilling burr amount to improve
|
|---|