Strength Prediction and Property Analysis of Concrete with Slag and Fly Ash as Cement Replacements

• Main Authors: Daniel Ma, 馬丹尼
• Other Authors: 詹穎雯
• Format: Others
• Language: en_US
• Published: 2012
• Online Access: http://ndltd.ncl.edu.tw/handle/03535601003723547398

碩士 === 國立臺灣大學 === 土木工程學研究所 === 100 === Due to the energy consumption of producing cement, the alternative use of industrial byproducts in concrete are beneficial to a country’s economy and reduces environmental pollution. The use of slag or fly ash to replace Portland cement will both yield favorable results such as better workability without water reducing agents, a higher strength at old age and low water hydration heat. The construction industry is now focusing on the ternary use of slag, fly ash and cement as the basis of cement mixture, therefore a prediction model is needed to accurately calculate its compressive strength is of great importance. This study aims to predict the compressive strength of concrete with the ternary use of slag, fly ash and cement, with only the k values of slag and fly ash as the foundation. Four water to binder ratios (w/b) were selected for this experiment (0.35, 0.45, 0.55, 0.65), each ratio having slag plus fly ash replacement levels of 0%, 30%, 40%, 50% respectively, with a 7 to 3 ratio between slag and fly ash. Data is then collected and two models are proposed concerning the ternary blends of slag, fly ash and Portland cement. The results show that it is feasible to superposition the separate k values of slag and fly ash to predict the compressive strength of ternary mixtures.