A study on the fabrication of material microstructure using CO2 laser processing and its application

A study on the fabrication of material microstructure using CO2 laser processing and its application

博士 === 國立成功大學 === 機械工程學系碩博士班 === 100

Bibliographic Details
Main Authors:	Shih-LungLin, 林士隆
Other Authors:	Chen-Kuei Chung
Format:	Others
Language:	en_US
Published:	2011
Online Access:	http://ndltd.ncl.edu.tw/handle/54633995160483817943

Similar Items

Laser Spectroscopy of Cs Atom in a Far-off Resonance Trap
by: Sheng-LungLin, et al.
Published: (2010)

Fabrication and Application of Porous Alumina Films
by: Shih-Lung Lin, et al.
Published: (2006)

Effects of the Vacuum Hot-Press Sintering Process on the Microstructures and Material Characteristics of CoCrMo Alloys
by: LIN, LUNG-YI, et al.
Published: (2019)

Fabrication and application of microstructure using novel CO2 laser micromachining
by: Hsing-YunWang, et al.
Published: (2011)

Direct Fabrication of Metal Rollers with Microstructures Using Dry Film Resist and its Rolling Application
by: Chih-Lung Lee, et al.
Published: (2008)

Studies on fabrication of microstructures in dielectric materials by femtosecond laser pulses
by: Nakaya, Takayuki
Published: (2010)

The Low Power High Performance Phase-Locked Loop for the Multi-Standard/Multi-Mode Re configurable Co existence System
by: Chin-LungLin, et al.
Published: (2011)

Study on Renovation Assessment System of the Existing Public Housing for the Elderly
by: Chien-LungLin, et al.
Published: (2011)

A Study of Timber Works in the Reconstruction of Yunlin Tuku Shun-Tian Temple Based on the 1935 Construction Procurement and Design Specification
by: Yen-LungLin, et al.
Published: (2018)

Development of the locking lead microstructure fabrication
by: Yu-Lung Huang, et al.
Published: (2019)

Fabrication of Ceramic Microstructures by Injection Molding
by: Chih-Lung Lan, et al.
Published: (1999)

The Characteristics of Holographic 3D Display and the Fabrication Processes of Recording Materials
by: Lin Shih-pin, et al.
Published: (2008)

Study of the metal particle solidification in Laser vaporization with shock wave effects
by: Shih-Lung Lin, et al.
Published: (2003)

Fabrication of flexible microstructure and its application
by: Chih-ChingCheng, et al.
Published: (2010)

An Application of DOE to Optimize EVA Co-molding Process
by: LIN, WEI-LUNG, et al.
Published: (2017)

Application of Adaptive Neural Fuzzy Inference System in Sleep Apnea Diagnosis
by: Han-LungLin, et al.
Published: (2015)

Fabrication and Application of Microstructured Optical Fiber
by: Hsin-Hung Lin, et al.
Published: (2010)

Rapid and mask-less laser-processing technique for the fabrication of microstructures in polydimethylsiloxane
by: Sones, C.L, et al.
Published: (2014)

The Effect of Process Variables on Microstructure in Laser-Deposited Materials
by: Bontha, Srikanth
Published: (2006)

Laser interference lithography and its application to fabricate phase mask
by: Yu-ChuLin, et al.
Published: (2011)

Aluminum Parts Fabricated by Laser-Foil-Printing Additive Manufacturing: Processing, Microstructure, and Mechanical Properties
by: Chia-Hung Hung, et al.
Published: (2020-01-01)

Fabrication and application of polymer materials using assisted technology for CO2 laser ablation
by: Teik-KhimTan, et al.
Published: (2012)

Fabrication of periodic microstructures on glass and polymer using low power CO2 laser
by: Muhammad, Imran
Published: (2013)

Microstructural Characteristics of Cement-Based Materials Fabricated Using Multi-Mode Fiber Laser
by: Youngjin Seo, et al.
Published: (2020-01-01)

Influence of laser processing on the corrosion and microstructure of zirconium based material
by: Reitz, W. (Wayne)
Published: (2013)

A study on the fabrication for polymer microstructure and its application
by: En-Jou Hsiao, et al.
Published: (2007)

Microstructure Analysis of the part fabricated with Ceramic Laser Rapid Prototyping and Process Improvement
by: Rui-Cheng Liu, et al.
Published: (2010)

Improved Laser Manipulation for On-chip Fabricated Microstructures Based on Solution Replacement and Its Application in Single Cell Analysis
by: Tao Yue, et al.
Published: (2014-02-01)

Study of Multiwavelength Erbium-Doped Fiber Laser Fabrication
by: Chih-Lung Tseng, et al.
Published: (2003)

The Study and Fabrication of Cr4+:YAG Crystal Fiber Laser and its Microstructure Analysis
by: Chien-Chih Lai, et al.
Published: (2004)

The Study and Fabrication of Cr4+:YAG Crystal Fiber Laser and its Microstructure Analysis
by: Chien-Chih Lai, et al.
Published: (2004)

Periodic Microstructures Fabricated by Laser Interference with Subsequent Etching
by: Shuang-Ning Yang, et al.
Published: (2020-07-01)

Fabrication of fused silica microstructure based on the femtosecond laser
by: Dunxiang Jian, et al.
Published: (2021-09-01)

Optical Microstructures Fabricated with Direct Laser Writing Technique
by: Kowalczyk M., et al.
Published: (2014-12-01)

Laser Ablated Microstructures on Different Biocompatible Materials for Various Downstream Applications
by: Yu-WeiChen, et al.
Published: (2019)

Mutual Inductance of Dual-coil Microstructure for Fingerprint Chip Application
by: LIN, SHIH-WEI, et al.
Published: (2018)

Microstructure and Mechanical Properties of Al–(12-20)Si Bi-Material Fabricated by Selective Laser Melting
by: Shikai Zhang, et al.
Published: (2019-07-01)

Excimer Laser and Miniature Acoustic Sensors: Fabrication, Evaluation and Applications
by: 郭士豪
Published: (2001)

Laser Materials Fabrication and Joining
by: Giuseppe Casalino
Published: (2020-06-01)

Fabrication of polymer surface microstructure using liquid-assisted CO2 Laser Ablation for the enhancement of Triboelectric effect
by: Udaya KumarSubramani, et al.
Published: (2016)