The Study of Optimizing Saw Wire Machine Parameters for Solar Process Using Experimental Methodology

The Study of Optimizing Saw Wire Machine Parameters for Solar Process Using Experimental Methodology

碩士 === 國立成功大學 === 工業與資訊管理學系專班 === 100

Bibliographic Details
Main Authors:	Jiann-JyhChen, 陳建志
Other Authors:	Liang-Hsuan Chen
Format:	Others
Language:	zh-TW
Published:	2011
Online Access:	http://ndltd.ncl.edu.tw/handle/57686895947767609499

Similar Items

The Study of improve Saw Wire Machine cost for Solar Process Using Experimental Methodology
by: Cuo-XiangHong, et al.
Published: (2014)

Design and Development of a Wire Rewinding Machine for Wire Sawing Process
by: Cheng-Chang Chen, et al.
Published: (2017)

The Study Of Wire Saw Machining
by: CHUN-YAO HSU, et al.
Published: (2000)

Development of the Testing Machine for Diamond Coated Wire in Wire Sawing Process
by: LI, CHIEN-CHIH, et al.
Published: (2013)

Optimization of Machining Parameters of SiC Single Crystal Cut by Diamond Wire Saw
by: Li Lun, et al.
Published: (2018-01-01)

Study on Wire Sawing of Solar Wafers
by: Jiun-Shuo Liang, et al.
Published: (2008)

Applying Minimum Quantity Lubrication To Fixed Diamond Wire Sawing Process And Development Of Small-Scale Wire Saw Machine
by: Zheng-Qing Liao, et al.
Published: (2014)

Machining characteristics of ceramics using wire saw
by: Chien-Lung Huang, et al.
Published: (2007)

Study on the Application of Nanoparticle Reinforced Polymer Wire Guides in Wire Sawing Process
by: Chien-Hong Lin, et al.
Published: (2015)

The improvement on the manufacture process of Ni/diamond sawing wire based on machine vision
by: ZHENG, XUAN-YANG, et al.
Published: (2018)

Slicing Silicon Carbide and Alumina with Diamond Wire Saw
by: Jian-Min Chen, et al.
Published: (2003)

Study of Electroplated Nickel Layer Thickness and Saw Parameters on Cutting Performance in Diamond Wire Sawing of Sapphire Ingots
by: Sing-Yu Chen, et al.
Published: (2015)

Study on Reactive Electrophoretic Diamond Wire Sawing Process of Crystalline Si Substrates for Solar Cell Application
by: Guan-Lin Chen, et al.
Published: (2015)

Study on Wear Effect of Wire Guide Roller for Wire Sawing Process
by: Pei-hsiun Chao, et al.
Published: (2011)

Study on the Sawing Characteristics and the Wear Behavior of Advanced Diamond Wire Saw
by: Yong-Ting Chen, et al.
Published: (2006)

The Effects of Different Slurry Concentrations and Wire Speeds for Swinging and Non-Swinging Wire-Saw Machining
by: Yao-Yang Tsai, et al.
Published: (2020-10-01)

Three-Dimensional Force Analysis on Multi-Wire Diamond Wire Saw Process
by: Yu-En Hsu, et al.
Published: (2015)

Design and Fabrication of Three-Dimensional Diamond Wire Saw Cutting Machine
by: Jia-Shuo Zhang, et al.
Published: (2003)

The Research of Slicing Parameters by Using Multi-wire Sawing Diamond Wire to Slice Sapphire Ingot
by: Yeh, Shou-Chih, et al.
Published: (2016)

Adjusting Wire Saw Machine Parameter And Useage Amount of Slurry to Decrease Multi-crystalline Silicon Cutting Cost
by: Cheng-fu Shen, et al.
Published: (2015)

Cutting Wire Tension Analysis for Multi-Wire Saw
by: Chih-Wei Ke, et al.
Published: (2013)

Study on Diamond Wire Sawing Process Using Minimum Quantity Lubrication
by: I-Lun Chen, et al.
Published: (2016)

Experimental study on manufacturing of grits-spiral- distribution electroplated wire saw
by: Yufei GAO, et al.
Published: (2016-12-01)

A Study of The Sawing Characteristics and Wear of Thin Diamond Wire Saw
by: Bo-Huei Yan, et al.
Published: (2004)

Kinematic Modeling and Simulation of Fixed Diamond Wire Sawing Process
by: Le Van Nhat, et al.
Published: (2014)

Effects on RTA Method for Wire Sawing Process of Silicon Ingot
by: Shou-Chih, Cheng, et al.
Published: (2012)

FRICTION COEFFICIENT OF DIAMOND WIRE SAW
by: Siniša Dunda
Published: (1998-12-01)

The Study for Parameters Optimization of Assembly Sawing Process By Taguchi Method.
by: Hom-Zen Hsu, et al.
Published: (2007)

Grey-Taguchi-Based Optimization of Wire-Sawing for a Slicing Ceramic
by: Yao-Yang Tsai, et al.
Published: (2020-12-01)

Effect of EDTA solution on Multi-Wire Diamond Wire Sawing Process of Lithium Tantalate Wafers
by: Yi-Ta Chiang, et al.
Published: (2019)

Influences of Energy Parameters on Wire Electrical Discharge Machining
by: Chen, Jian-Jou, et al.
Published: (1998)

Study on Optimization of Wire Electrical Discharge Machining Process Parameters of Pure Tungsten
by: Ming-Hua Hsieh, et al.
Published: (2009)

Research on Wafer Cutting Parameters for Dicing saw
by: 陳志清
Published: (2019)

Purification of Effluent from Primary Treatment for Solar-Cell Wire-Saw and Chemical Mechanical Polishing Processes with Membrane Bioreactor
by: Hao-Chin Lai, et al.
Published: (2011)

Study of Sawing Performance of High-speed Band Sawing Machine on H-beam
by: Jian-Bin Zhang, et al.
Published: (2015)

The Analysis of Sawing Process by Response Surface Methodology
by: Yu-Ming Wang, et al.
Published: (2010)

Multi-Wire Sawing of Translucent Alumina Ceramics
by: Lea Schmidtner, et al.
Published: (2020-01-01)

Slurry Analysis for Wire Sawing of Silicon Wafers
by: Bing-Lin Kuo, et al.
Published: (2009)

Study on Multi-Wire Reactive Electrophoretic Diamond Wire Sawing Process of Single-Crystalline Sapphire Wafers
by: Yi-De Li, et al.
Published: (2018)

Gray Relational Analysis to Explore the Optimal Process Parameters of Wire Electrical Discharge Machining in SKD61 Processing
by: Yu-Rong Chen, et al.
Published: (2019)

Cannot write session to /tmp/vufind_sessions/sess_mssfbn5kvhr90s0c263nb8lqkc