Study on Head Forging of Hexagonal Tightening Screw

Study on Head Forging of Hexagonal Tightening Screw

Show other versions (1)

碩士 === 高苑科技大學 === 機械與自動化工程研究所 === 100 === The study aims at the head of hexagonal tightening screw to perform forging simulation analysis. Assuming constant shear friction, the simulation and analysis of one die and two passes are carried out using DEFORM-3D finite element analysis software. By mea...

Full description

Bibliographic Details
Main Authors:	Yi-Nan Lin, 林憶男
Other Authors:	鄒國益
Format:	Others
Language:	zh-TW
Published:	2012
Online Access:	http://ndltd.ncl.edu.tw/handle/55123954080648229581

Similar Items

Study on Head Forging of Hexagonal Tightening Screw
by: 林憶男
Published: (2012)

Screaming screw tightenings
by: Andersson, Jacob, et al.
Published: (2017)

Study on failure of cold forging die – Take Hexagonal Screw with Flange as an Example
by: 金昌擎
Published: (2018)

Tightening techniques for the retaining screws of universal abutment
by: Alexandre Wittcinski REGALIN, et al.

The Pre-Loaded Set-Screw in InterTAN Nail: Should It Be Tightened or Not Tightened in Pertrochanteric Hip Fractures
by: Shou-Chao Du MD, et al.
Published: (2021-02-01)

Study of Hexagon Screws During Upsetting and Screw Forming
by: Yi-Shu Tu, et al.
Published: (2010)

Stresses Induced in Dental Implant Retaining Screw before Tightening
by: Mohamed Tharwat Hamed,, et al.
Published: (2019-12-01)

Die and Process Design for Heading and Threading of Hexagonal Socket Titanium Screws
by: Bo-wei Chen, et al.
Published: (2014)

Study on Head Forging of SUS302 Stainless Steel Self-Drilling Screw
by: Huang, Kuan-Jen, et al.
Published: (2013)

The Study of the Forging Process for Hexagonal Flange Welded Nuts
by: CHEN,SHIH-TING, et al.
Published: (2019)

Continuous torque measurements during screw tightening of prostheses with different fitting inaccuracies
by: Tsou, Chih-Ming, et al.
Published: (2002)

Improvement of the Defect of Torx Pan Head Screw by Using Cold Forging Process
by: HSU, YIN-HSIANG, et al.
Published: (2018)

Study on the Multi-Stage Forging of Hexagonal Flange Welding Nut
by: Hsuan Li Shin, et al.
Published: (2014)

Study on Multi-Stage Forging of Hexagonal Flange Vehicle Bolt
by: Gong-De Pei, et al.
Published: (2013)

Effect of MoS2 Additive on the tribological performance of loosing and tightening process for screw and nut
by: Chun-Ta Hsu, et al.
Published: (2000)

Comparison between Stresses Induced on the Dental Implant Retaining Screw before and after Tightening
by: Mohamed Tharwat Hamed, et al.
Published: (2019-12-01)

Improvement of Forging Laps for Square Recess Screw
by: Lee Yueh-Lin, et al.

The Analysis of Cold Forging Quality of Screws
by: WANG, WEN-KAI, et al.
Published: (2014)

Effects of Different Screw Head Designs on Screw Head Slippage
by: Chen-huei Lin, et al.
Published: (2014)

TIGHTENING UP HERE AND THERE: WOMEN AS THE HEAD OF THE FAMILY IN THE PLOT OF CARE AND PROVISION
by: ALINE TOSTA DOS SANTOS
Published: (2010)

Forging of Mg-Al-Zn Magnesium Alloys on Screw Press and Forging Hammer
by: Andrzej Gontarz, et al.
Published: (2021-12-01)

Multi-stage forging on torx-pin screw with high torque
by: Tzou Gow-Yi, et al.
Published: (2017-01-01)

Fabrication Improvement of Cold Forging Hexagonal Nuts by Computational Analysis and Experiment Verification
by: Shao-Yi Hsia, et al.
Published: (2015-01-01)

Torque Removal Evaluation of Screw in One-Piece and Two-Piece Abutments Tightened with a Handheld screwdriver
by: Jalil Ghanbarzadeh, et al.
Published: (2013-12-01)

Torque Removal Evaluation of Screw in One-Piece and Two-Piece Abutments Tightened with a Handheld screwdriver
by: Jalil Ghanbarzadeh, et al.
Published: (2013-12-01)

New Ductile Fracture Model of Hexagon Flange Nut in Cold Forging
by: SHEN,YU-HOW, et al.
Published: (2018)

Analysis of Near-net-shape Forging for Hexagonal Bolts with FE Simulation
by: ou sheng tang, et al.
Published: (2007)

Prediction of Ductile Fracture for Hexagon Socket Bolts with Collar in Cold Forging
by: LI,WEN-XIANG, et al.
Published: (2017)

Initial tightening of a cylinder head assembly on a marine engine block
by: Mihaela TUROF
Published: (2020-06-01)

[en] TIGHTENING UP HERE AND THERE: WOMEN AS THE HEAD OF THE FAMILY IN THE PLOT OF CARE AND PROVISION
by: ALINE TOSTA DOS SANTOS
Published: (2011)

Study on Forging and Thread-rolling Processes of Magnesium Alloy Screws
by: Kai-neng Huang, et al.
Published: (2011)

Study on Multi-Stage Cold Forging of Joint Screw for Battery
by: 孫明照
Published: (2010)

Effect of the screw tightening sequence on the stress distribution of a dynamic compression plate: A pilot finite element study
by: Xiaoreng Feng, et al.
Published: (2019-09-01)

Comparison of the Maximum Hand-generated Torque by professors and postgraduate dental students for Tightening the AbutmentScrews of Dental Implants
by: Feridoun Parnia, et al.
Published: (2018-09-01)

Study of Heat-treatment Distortion on Hexagonal head screw (M8×150) of medium carbon steel (SAE 1035SK)
by: Zhi-Wei Wu, et al.
Published: (2017)

Sharpening and tightening surgical scissors
by: Ismael Cordero
Published: (2011-12-01)

A time for belt-tightening
by: Elaine Chinyelu Azinge
Published: (2016-01-01)

Preform Design for Cold Forging of Alloy Steel Torx Screw
by: Ben-Li Chen, et al.

Prediction of New Ductile Damage Model for Screws in Cold Forging
by: Liu,Ying-Jun, et al.
Published: (2018)

Stress Analysis of Bridge Frameworks and Titanium Abutments During Screw Tightening of Implant Suppoerted Bridge due to Different Fitting Inaccuracies
by: 林立立立
Published: (1996)