Improvement study on thin structure for single side of capacitive touch Panel

• Main Authors: Wei Chih Hsu, 徐偉智
• Other Authors: Chung Ping Liu
• Format: Others
• Language: zh-TW
• Published: 2011
• Online Access: http://ndltd.ncl.edu.tw/handle/81094020778006822094

碩士 === 元智大學 === 電機工程學系 === 99 === When the capacitive touch panel and the protective film were bonded together, the combination yield of the two glass substrates in the process for manufacturing the touch panel is very low. Because glass substrates are the same, both of the material used and the working hour needed are largely wasted when the remanufacturing process was proceeding. In this thesis, a new design for the structure of the touch panel and a new manufacturing process were proposed to improve the problem of low yield. After numerous experiments, we found that only two additional processes of producing the shielding layer and the flat layer are necessary. Moreover, according to measurement data, this solution can actually increase the production yield and simultaneously make the panel device thinning.