Integrations and Applications of Laser Marking System with Galvanometer

• Main Authors: He, Shinwei, 何信緯
• Other Authors: Horng, Jingshyang
• Format: Others
• Language: zh-TW
• Published: 2012
• Online Access: http://ndltd.ncl.edu.tw/handle/90567215951027598945

碩士 === 國立聯合大學 === 光電工程學系碩士班 === 100 === The applications of laser marking becomes very important because of its more wider machining range, faster machining speed and better quality. In this thesis, we present the experiences on the integrations of the laser marking system and on making the data base for different materials. Based on LabVIEW environment , PC could connect the biaxial galvanometric scanner controller and carbon dioxide laser controller by RJ45 and RS-232, respectively. Experimental results showed that: (1) the optimum working distance of this system is 14.8cm from f-θ lens, and where the minimum diameter of the light spot is 0.95mm, (2) regardless of the frequency of the pulsed laser, the same duty cycle would give the similar optical power output. (3)the line width of the working piece is dominantly influenced by the speed of the galvanometric scanner. The speed range would be from 10mm /S to 300mm/S and from 10 mm / S to 700mm /S for acrylic and plank, respectively. Usually, the jump speed would be set to 2000mm /S. (4) the change of the duty cycle would influence significantly the depth of the line segments, but the width of which would be nearly unchanged. Finally, we marked successfully several different patterns on four acrylic and plank samples with this system.