A 3.1~10.6 GHz UWB Low Noise Amplifier
碩士 === 國立中山大學 === 電機工程學系研究所 === 99 === The main contents of this thesis are improving a UWB LNA, and analyze the input-matching, the noise, and the gain. First we increase the width of the input transistor, and remove source-degeneration inductor. Those ways can increase the gain and reduce the nois...
Main Authors: | , |
---|---|
Other Authors: | |
Format: | Others |
Language: | en_US |
Published: |
2011
|
Online Access: | http://ndltd.ncl.edu.tw/handle/49031754175145720302 |
id |
ndltd-TW-099NSYS5442067 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-TW-099NSYS54420672015-10-19T04:03:19Z http://ndltd.ncl.edu.tw/handle/49031754175145720302 A 3.1~10.6 GHz UWB Low Noise Amplifier 3.1~10.6 GHz CMOS 超寬頻低雜訊放大器 Yi-Lung Hsieh 謝宜龍 碩士 國立中山大學 電機工程學系研究所 99 The main contents of this thesis are improving a UWB LNA, and analyze the input-matching, the noise, and the gain. First we increase the width of the input transistor, and remove source-degeneration inductor. Those ways can increase the gain and reduce the noise of the circuit. In the input matching, we use a shunt capacitor, a series inductor, and the impedance of the transistor itself to achieve high frequency matching. The lower frequency matching is achieved by negative feedback resistor. The UWB LNA dissipates 10.14 mW power and achieves input return loss (S11) below -11.5 dB, output return loss (S22) below -11.9 dB, forward gain (S21) of 14.4±0.4 dB, reverse isolation (S12) below -26.7 dB, and noise figure (NF) of 2.6~3.5 dB over the 3.1~10.6 GHz band of interest. 1-dB compression point (P1dB) of -16.8 dBm and input third-order inter-modulation point (IIP3) of -8.1 dBm are achieved at 6.85 GHz. Chia-Hsiung Kao 高家雄 2011 學位論文 ; thesis 55 en_US |
collection |
NDLTD |
language |
en_US |
format |
Others
|
sources |
NDLTD |
description |
碩士 === 國立中山大學 === 電機工程學系研究所 === 99 === The main contents of this thesis are improving a UWB LNA, and analyze the input-matching, the noise, and the gain.
First we increase the width of the input transistor, and remove source-degeneration inductor. Those ways can increase the gain and reduce the noise of the circuit. In the input matching, we use a shunt capacitor, a series inductor, and the impedance of the transistor itself to achieve high frequency matching. The lower frequency matching is achieved by negative feedback resistor.
The UWB LNA dissipates 10.14 mW power and achieves input return loss (S11) below -11.5 dB, output return loss (S22) below -11.9 dB, forward gain (S21) of 14.4±0.4 dB, reverse isolation (S12) below -26.7 dB, and noise figure (NF) of 2.6~3.5 dB over the 3.1~10.6 GHz band of interest. 1-dB compression point (P1dB) of -16.8 dBm and input third-order inter-modulation point (IIP3) of -8.1 dBm are achieved at 6.85 GHz.
|
author2 |
Chia-Hsiung Kao |
author_facet |
Chia-Hsiung Kao Yi-Lung Hsieh 謝宜龍 |
author |
Yi-Lung Hsieh 謝宜龍 |
spellingShingle |
Yi-Lung Hsieh 謝宜龍 A 3.1~10.6 GHz UWB Low Noise Amplifier |
author_sort |
Yi-Lung Hsieh |
title |
A 3.1~10.6 GHz UWB Low Noise Amplifier |
title_short |
A 3.1~10.6 GHz UWB Low Noise Amplifier |
title_full |
A 3.1~10.6 GHz UWB Low Noise Amplifier |
title_fullStr |
A 3.1~10.6 GHz UWB Low Noise Amplifier |
title_full_unstemmed |
A 3.1~10.6 GHz UWB Low Noise Amplifier |
title_sort |
3.1~10.6 ghz uwb low noise amplifier |
publishDate |
2011 |
url |
http://ndltd.ncl.edu.tw/handle/49031754175145720302 |
work_keys_str_mv |
AT yilunghsieh a31106ghzuwblownoiseamplifier AT xièyílóng a31106ghzuwblownoiseamplifier AT yilunghsieh 31106ghzcmoschāokuānpíndīzáxùnfàngdàqì AT xièyílóng 31106ghzcmoschāokuānpíndīzáxùnfàngdàqì AT yilunghsieh 31106ghzuwblownoiseamplifier AT xièyílóng 31106ghzuwblownoiseamplifier |
_version_ |
1718094141252960256 |