Application of Fuzzy Control to improve flow balance of multi-cavity Hot runner system

Application of Fuzzy Control to improve flow balance of multi-cavity Hot runner system

碩士 === 國立高雄應用科技大學 === 模具工程系 === 99 === In order to enhance production efficiency multi-cavity hot runner mold has been popularly used in injection molding process. However, In the multi-cavity hot runner mold, the temperature and mold cavity pressure distributions are difficult of reaching homogeneo...

Full description

Bibliographic Details
Main Authors:	HUNG,SHIN-MIN, 洪試閔
Other Authors:	Huang,Chun-Ching
Format:	Others
Language:	zh-TW
Published:	2011
Online Access:	http://ndltd.ncl.edu.tw/handle/48875541446290502832

Similar Items

Study on the Flowing Balances Analysis of the Multi-Cavity Modulus Runner System
by: Cheng, Chao-Han, et al.
Published: (2011)

Position Allocating and Runner Balancing in Navigating Multi-cavity Mold Design
by: Kun-Jing Li, et al.
Published: (2015)

Runner Design and Optimization of Multi-Cavity Optical Mold
by: Lin, Hsien-Jang, et al.
Published: (2011)

A study of hot runner nozzle design effect on the plastic melt fluidity
by: HWANG,KUAN-MIN, et al.

Study on Size Effect of Hot Runner and Hot Drop on Melt Flow Length
by: Cheng-Feng Huang, et al.
Published: (2011)

Analysis and verification of multi-cavity flow balance for different products
by: Jung-Hut Chung, et al.
Published: (2011)

Study on the Flow Balance Improvement of Two-cavity Family Mold
by: Wang-Su Lee, et al.
Published: (2013)

Study on the Hot Runner Nozzle Design and Its Effect of the Plastic Melt Flow
by: Cheng-Wei Lo, et al.
Published: (2013)

Study of a Single Cylinder with Multi-Valve Gates for Hot Runner Systems
by: Han-Chang Lee, et al.
Published: (2014)

Effect of Process Conditions of Co-injection Molding on the Flow Balance of Multi-Cavities
by: Sun, Yu-han, et al.
Published: (2012)

Control of Hot Runner Type Micro Injection Molding Module
by: Cang-Chin Yang, et al.
Published: (2006)

A Study On the Flowing Balances Analysis of the Family Mold Modulus Runner System
by: Yu-Ying Li, et al.
Published: (2014)

To study the optimum application of plastic oblong shape buckle on hot runner process
by: 張晉郡, et al.
Published: (2014)

Energy balance in competitive runners and swimmers
by: Jang, Kyung Tae
Published: (2011)

Correlation of Runner and Cavity Pressure in Molds for Injection Molding Process
by: Lan Jun Kai, et al.
Published: (2013)

Design Of Hot Runner Mold For Fan Diverter Parts
by: Yu-Lun Cheng, et al.
Published: (2017)

E-Learning System Establishment for Hot Runner Mold
by: Yu Sung, et al.
Published: (2012)

Design of The Hot Runner Mold Quick Mold Change
by: Hao-Ming Yeh, et al.
Published: (2013)

Study of the Nozzle Heater Design in Hot Runner System
by: Chen-Yang Lin, et al.
Published: (2015)

Applying Fuzzy Multi-Criteria Decision Making to Select Tourist Hotel Housekeeping Runner
by: Luo, Shih-Kun, et al.
Published: (2017)

Rapid Numerical Estimation of Pressure Drop in Hot Runner System
by: Jae Sung Jung, et al.
Published: (2021-02-01)

Study on Optimal Thermal Distribution for Hot Runner Manifold Heater
by: Chen-Yang Lin, et al.
Published: (2009)

Development of a Hot Runner Type Micro-Injection Unit
by: Zhi-Zen Chang, et al.
Published: (2003)

Design and Implementation of Internet Communication Module Based on Hot-runner Temperature Controller
by: Rong-Tsuen Chen, et al.
Published: (2006)

Effect of Hot Spring Bath on Meridian Energy Balance
by: Hung Yu-Ju, et al.
Published: (2015)

Unsteady flow in wicket gate and runner with focus on static and dynamic load on runner
by: Antonsen, Øyvind
Published: (2007)

Application of Taguchi Method to Improve the Quality of Punching the Runner
by: 葉易青
Published: (2017)

High Precision Optical Group Fiber Hot Runner Molding Design
by: Yi-Lin Wu, et al.
Published: (2009)

A Study on Flow Balance in Two-Cavity Mold of Sphygmomanometer
by: Wei-Ting Tsai, et al.
Published: (2014)

Study on the Temperature Control of Nozzle in Hot Runner System viaDiscontinuous Heating Method
by: Cheng-Li Hsu, et al.
Published: (2013)

A numerical study of flow field in the cylinder by using control valve in the runner
by: Min-Chieh Chuang, et al.
Published: (2004)

Nonlinear multi-time-delay stochastic estimation: application to cavity flow and turbulent channel flow
by: Lasagna, Davide, et al.
Published: (2015)

Turbulent heat transfer for impinging jet flowing inside a cylindrical hot cavity
by: Halouane Yacine, et al.
Published: (2015-01-01)

Study Weld Line Strength by Sequential Valve Gatein Hot Runner System
by: Hsin-Wei Chen, et al.
Published: (2008)

Study of eliminating weld line by sequential valve gate in hot runner system
by: mei li fang, et al.
Published: (2006)

Study of Interfacial Gate in Hot Runner Tip on the Influence of Broken Temperature of Melt
by: Yi-fu Liu, et al.
Published: (2016)

Assessment of Metal Flow Balance in Multi-Output Porthole Hot Extrusion of AA6060 Thin-Walled Profile
by: Xin Xue, et al.
Published: (2018-06-01)

Investigation of the Flow through the Runner of a Cross-Flow Turbine
by: Walseth, Eve Cathrin
Published: (2009)

Study of the Orientation and Breakage History of Fibers through Runner and Cavity in Injection Molded Reinforced Thermoplastics
by: Xiang-LanPeng, et al.
Published: (2017)

Study on the Homogeneity of Temperature Distribution Using Heat Pipe Design in Hot Runner Manifold
by: Ratno—Dini Pitoyo, et al.

Cannot write session to /tmp/vufind_sessions/sess_f6uufa0phlmlv2hqgkj3iepue9