| Summary: | 碩士 === 崑山科技大學 === 光電工程研究所 === 99 === The size of the output voltage of traditional power generators depend on the magnetic flux changes in the induction coil over an amount of time, so in order to increase the output voltage one needs to increase the size of the magnetic field, the number of induction coils, add silicon steels, and install gear boxes..etc. However, these methods will cause the rotor weight to increase, resulting in a magnetic pull, thereby increasing the generator bearing load which makes the rotor harder to run, making it a bad choice to use clean energy as its driving source. Therefore how to improve traditional power generating devices is the purpose of this research.
This thesis report introduces a newly developed “Planet Style Power Generator”, and applies this generator on a variety of devices. Based on actual testing results using the device on HPEG, the maximum output of the developed HPEG can reach 300W, with the output current being 1.2~1.3A. Using the device on an emergency back up power generator, the maximum output power could reach up to 46W, with a maximum output current of 0.38A.Used on Planetary axial flux a single-phase AC power permanent magnet generator, the greatest successful output is about 410W when the rotating speed reaches the maximum 200 rpm.
|
|---|
