The design of X-band mixer using inductor resonator and C-band Image rejection mixers

碩士 === 長庚大學 === 電子工程學系 === 99 === In this thesis,X- and C-band mixer circuits with image rejection functions have been realized by using 0.5 μm pHEMT and 0.15 μm pHEMT process, respectively. The X-band Gilbert cell down-conversion mixer was designed at 12 GHz with the bandwidth from 5 to 20 GHz. An...

Full description

Bibliographic Details
Main Authors: Chi Wei Liu, 劉耆瑋
Other Authors: J. S. Fu
Format: Others
Published: 2011
Online Access:http://ndltd.ncl.edu.tw/handle/43551049911963397385
Description
Summary:碩士 === 長庚大學 === 電子工程學系 === 99 === In this thesis,X- and C-band mixer circuits with image rejection functions have been realized by using 0.5 μm pHEMT and 0.15 μm pHEMT process, respectively. The X-band Gilbert cell down-conversion mixer was designed at 12 GHz with the bandwidth from 5 to 20 GHz. An extra inductor was added to enhance the conversion gain. The conversion gain is 8 dB, is -16 dBm,IIP3 is about 6 dBm, and total power consumption is about 60 mW. For C-band image rejection down- and up-conversion mixers, the image signal can be suppressed by phase cancellation approach. The measured results of up-conversion mixer show that the conversion loss of -5.5 dB and image rejection ratio of 20 dB in desired band, isolation between each port is better than 20 dB, and IIP3 is -4 dBm with power consumption of 120 mW. Moreover, the measured results of down-conversion mixer show that the conversion gain of 0.5dB, image rejection ratio of 21 dBm, and IIP3 of -4.5 dBm with power consumption of 63mW.