Two Axis Sun Tracker System Design and Control

碩士 === 國立勤益科技大學 === 電機工程系 === 99 === The aim of this thesis is to design and control a two axis sun tracker system. The sun tracker system consists mainly of a tracking mechanism, a sun location sensor, and an electrical control system as follows. 1.Two axis sun tracker mechanism design: The me...

Full description

Bibliographic Details
Main Authors: Wei-Zuo Chen, 陳威佐
Other Authors: Chin-Pao Hung
Format: Others
Language:zh-TW
Published: 2011
Online Access:http://ndltd.ncl.edu.tw/handle/98680502833906364299
id ndltd-TW-099442241
record_format oai_dc
spelling ndltd-TW-0994422412015-10-14T04:07:12Z http://ndltd.ncl.edu.tw/handle/98680502833906364299 Two Axis Sun Tracker System Design and Control 雙軸太陽追蹤器之設計及控制 Wei-Zuo Chen 陳威佐 碩士 國立勤益科技大學 電機工程系 99 The aim of this thesis is to design and control a two axis sun tracker system. The sun tracker system consists mainly of a tracking mechanism, a sun location sensor, and an electrical control system as follows. 1.Two axis sun tracker mechanism design: The mechanism of sun tracker system has mainly three parts, a horizontal axis base, a vertical axis loading platform, and a control box. The horizontal axis base and vertical axis loading platform are driven by high gear ratio DC motors to reduce the motor size and the rated power. The designed gear ratio is higher enough to load middle size solar cells. 2.The sun location sensor includes sensor mechanism and CdS (Cadmium Sulphide) sensor circuit. The sensor mechanism is design for arranging four CdS on four symmetrical ramp surfaces to benefit the CdS have different sensitivity to distinguish different light source. 3.The electrical control system consists mainly of servo control card, CdS sensor circuit, and programming. The servo control card uses PIC18F8720 chip as the control kernel. Integrating the necessary power MOSFET and encoder signal circuit it can execute the position loop control of DC servo motor. The CdS circuits are divided as north-southern and west-east two groups. Each group contains signal processing circuit to ensure signal measurement. Different light location will generate voltage difference from the sensor circuit. Zero voltage difference denotes the loading panel is orthogonal to light beams. Finally, the developed two axis sun tracker system is tested using incandescent lamp, fluorescent lamp, and sunlight to demonstrate the feasibility and success. The experimental results show that the loading panel can track the different light source always, no matter the incandescent lamp, fluorescent lamp, or sunlight. Keywords: sun tracker, PIC microcontroller, solar cell, solar array, servo control. Chin-Pao Hung 洪清寶 2011 學位論文 ; thesis 70 zh-TW
collection NDLTD
language zh-TW
format Others
sources NDLTD
description 碩士 === 國立勤益科技大學 === 電機工程系 === 99 === The aim of this thesis is to design and control a two axis sun tracker system. The sun tracker system consists mainly of a tracking mechanism, a sun location sensor, and an electrical control system as follows. 1.Two axis sun tracker mechanism design: The mechanism of sun tracker system has mainly three parts, a horizontal axis base, a vertical axis loading platform, and a control box. The horizontal axis base and vertical axis loading platform are driven by high gear ratio DC motors to reduce the motor size and the rated power. The designed gear ratio is higher enough to load middle size solar cells. 2.The sun location sensor includes sensor mechanism and CdS (Cadmium Sulphide) sensor circuit. The sensor mechanism is design for arranging four CdS on four symmetrical ramp surfaces to benefit the CdS have different sensitivity to distinguish different light source. 3.The electrical control system consists mainly of servo control card, CdS sensor circuit, and programming. The servo control card uses PIC18F8720 chip as the control kernel. Integrating the necessary power MOSFET and encoder signal circuit it can execute the position loop control of DC servo motor. The CdS circuits are divided as north-southern and west-east two groups. Each group contains signal processing circuit to ensure signal measurement. Different light location will generate voltage difference from the sensor circuit. Zero voltage difference denotes the loading panel is orthogonal to light beams. Finally, the developed two axis sun tracker system is tested using incandescent lamp, fluorescent lamp, and sunlight to demonstrate the feasibility and success. The experimental results show that the loading panel can track the different light source always, no matter the incandescent lamp, fluorescent lamp, or sunlight. Keywords: sun tracker, PIC microcontroller, solar cell, solar array, servo control.
author2 Chin-Pao Hung
author_facet Chin-Pao Hung
Wei-Zuo Chen
陳威佐
author Wei-Zuo Chen
陳威佐
spellingShingle Wei-Zuo Chen
陳威佐
Two Axis Sun Tracker System Design and Control
author_sort Wei-Zuo Chen
title Two Axis Sun Tracker System Design and Control
title_short Two Axis Sun Tracker System Design and Control
title_full Two Axis Sun Tracker System Design and Control
title_fullStr Two Axis Sun Tracker System Design and Control
title_full_unstemmed Two Axis Sun Tracker System Design and Control
title_sort two axis sun tracker system design and control
publishDate 2011
url http://ndltd.ncl.edu.tw/handle/98680502833906364299
work_keys_str_mv AT weizuochen twoaxissuntrackersystemdesignandcontrol
AT chénwēizuǒ twoaxissuntrackersystemdesignandcontrol
AT weizuochen shuāngzhóutàiyángzhuīzōngqìzhīshèjìjíkòngzhì
AT chénwēizuǒ shuāngzhóutàiyángzhuīzōngqìzhīshèjìjíkòngzhì
_version_ 1718089937217126400