A Study of Microtexture and Strain Rate on the Mechanical Properties of Ti-15Mo-5Zr-3Al Alloy

A Study of Microtexture and Strain Rate on the Mechanical Properties of Ti-15Mo-5Zr-3Al Alloy

博士 === 國立臺灣科技大學 === 機械工程系 === 98 === ABSTRACT This study aims at the investigation of the effects of microtexture and strain rate on the mechanical properties of Ti-15Mo-5Zr-3Al alloy. The dependence of strain rate and heated temperature on microtexture, fracture response and mechanical properties...

Full description

Bibliographic Details
Main Authors:	Su-Tang Chiou, 邱仕堂
Other Authors:	Hsien-Lung Tsai
Format:	Others
Language:	zh-TW
Published:	2010
Online Access:	http://ndltd.ncl.edu.tw/handle/37300790467535754810

Similar Items

Analysis of Microstructures on Ti-15Mo-5Zr-3Al Alloy
by: Wei ting yu, et al.
Published: (2012)

Effect of the substitutional elements on the microstructure of the Ti-15Mo-Zr and Ti-15Zr-Mo systems alloys
by: Diego Rafael Nespeque Correa, et al.
Published: (2015-04-01)

Impact Response and Microstructural Evolution of Fe-32Mn-10Al-1.07C-0.36Mo Alloy Subjected to High Velocity Impact Loading
by: CHIOU,SU-TANG, et al.
Published: (2002)

Effects of Laser Microtexturing on the Wetting Behavior of Ti6Al4V Alloy
by: Juan Manuel Vazquez-Martinez, et al.
Published: (2018-04-01)

Effect of growth rate on microstructure and microhardness of directionally solidified Ti-44Al-5Nb-1.5Cr-1.5Zr-1Mo-0.1B alloy
by: Zhi-ping Li, et al.
Published: (2020-07-01)

STRAIN INDUCED PHASE TRANSFORMATION IN Ti-15Mo β ALLOY
by: Wang Xiaoming, et al.
Published: (2020-01-01)

Microstructural Characterization of the TiMoZrTa Alloy
by: Mădălina Simona BĂLȚATU, et al.
Published: (2015-12-01)

Effect of Zr content on mechanical properties and microstructure of Ti-Mo-Zr alloys
by: Yen-HanFu, et al.
Published: (2015)

Effects of Mo, Nb, Ta, Ti, and Zr on Mechanical Properties of Equiatomic Hf-Mo-Nb-Ta-Ti-Zr Alloys
by: Ko-Kai Tseng, et al.
Published: (2018-12-01)

Phase Transformation of a Ti-15Mo-5Zr-3Al Brazed Joint Using Clad Ti-15Cu-15Ni Filler
by: Gui-Lin Yue, et al.
Published: (2020-01-01)

Diffusivities and Atomic Mobilities in bcc Ti-Mo-Zr Alloys
by: Weimin Bai, et al.
Published: (2018-10-01)

Effect of cross-sectional area reduction rate and alloy composition on the formation of <001>-fiber texture in Ti-Mo-Al-Zr alloy wire
by: Shinohara Yuri, et al.
Published: (2020-01-01)

Effect of Mo, V and Zr on the microstructure and mechanical properties of Ti2AlNb alloys
by: Du Yujun, et al.
Published: (2020-01-01)

Transformations, Recrystallization, Microtexture and Plasticity in Titanium Alloys
by: Balachandran Shanoob, et al.
Published: (2020-01-01)

Influence of microtexture on ultrasonic reflection in Ti-6Al-4V alloy hot-forged in α+β region
by: Ito Yoshinori, et al.
Published: (2020-01-01)

Nanoscale Twinned Ti-44Al-4Nb-1.5Mo-0.007Y Alloy Promoted by High Temperature Compression with High Strain Rate
by: Wenqi Guo, et al.
Published: (2018-08-01)

Assessment of grain refinement by microtexture analysis in thermomechanically processed Al 2519 alloy
by: Stancy, Steven L.
Published: (2012)

Strain Rate Sensitivity of Tensile Properties in Ti-6.6Al-3.3Mo-1.8Zr-0.29Si Alloy: Experiments and Constitutive Modeling
by: Jun Zhang, et al.
Published: (2018-09-01)

The Analysis of Phase Transformation in Ti-5Al-4Cr-4Mo-2Zr-2Sn Alloy
by: Yi-Ping Chuang, et al.
Published: (2006)

Second-generation Titanium alloys Ti-15Mo and Ti-13Nb-13Zr: A Comparison of the Mechanical Properties for Implant Applications
by: Brunke Florian, et al.
Published: (2020-01-01)

Infrared vacuum brazing of Ti alloys using Ti-15Cu-15Ni
by: Chuen-Yi Chiou, et al.
Published: (2008)

Ti-15V-3Cr-3Sn-3Al Alloy in Electron Beam and Tungsten Inert Gas Arc Welding Produce Microtexture and Mechanical Property Analysis
by: CHAO,CHIH-LUNG, et al.
Published: (2006)

Coherent ω phase induced yield strength improvement in Ti-19Nb-1.5Mo-4Zr-8Sn alloy
by: Siyun Li, et al.
Published: (2020-12-01)

The Influence of Copper on the Microtexture of Fe-Si-Al Alloys for Non-Oriented Electrical Sheets
by: Steiner Petrovič, D., et al.
Published: (2007-01-01)

The Properties of Ti-4.5Al-1.5Mo-1.2V-0.5Fe Alloy
by: Ming-Chieh Chang, et al.
Published: (2007)

Estudo de tratamentos térmicos da liga Ti-15Zr-xMo /
by: Xavier, Caio Castanho.
Published: (2017)

Estudo de tratamentos térmicos da liga Ti-15Zr-xMo
by: Xavier, Caio Castanho [UNESP]
Published: (2017)

Preparation and characterization of Ti-15Mo alloy used as biomaterial
by: José Roberto Severino Martins Júnior, et al.
Published: (2011-03-01)

Effect of bismuth addition on properties of Ti-15Mo alloy
by: Tian-Cheng Tsai, et al.
Published: (2007)

Microstructure and strength of a Ti-15wt.% Mo alloy
by: Pennock, G. M.
Published: (1980)

The Mechanical Properties of the Mo-0.5Ti and Mo-0.1Zr Alloys at Room Temperature and High Temperature Annealing
by: Cui Chaopeng, et al.
Published: (2017-02-01)

Dynamic impact response and microstructural evolution of Ti-12Mo-6Zr-2Fe biomedical alloy under high strain rate and various temperatures
by: Szu-HanWang, et al.
Published: (2019)

Corrosion Resistance, Biocompatibility and Bond Strength with Porcelain of Ti-10Zr-xMo Alloys for Dental Applications
by: Ciou, Yin-Ting, et al.
Published: (2014)

Recrystallisation nucleation and microtexture development in aluminium-iron rolled alloys
by: Deards, Nicola
Published: (1992)

Effect of Thermomechanical Processing on Microstructure And Microtexture Evolution in Titanium Alloys
by: Nair, Shanoob Balachandran
Published: (2017)

Strong and ductile beta Ti–18Zr–13Mo alloy with multimodal twinning
by: Jinyong Zhang, et al.
Published: (2019-06-01)

Strong and ductile beta Ti-18Zr-13Mo alloy with multimodal twinning
by: Zhang, Jinyong, et al.
Published: (2020)

EBSD Investigation of the Microtexture of Weld Metal and Base Metal in Laser Welded Al–Li Alloys
by: Li Cui, et al.
Published: (2018-11-01)

Effects of Zr Content on the Microstructure and Performance of TiMoNbZr<sub>x</sub> High-Entropy Alloys
by: Gengbiao Chen, et al.
Published: (2021-08-01)

Characterization of deformation mechanisms in pre-strained NiAl-Mo composites and α-Ti alloy
by: Kwon, Jonghan
Published: (2012)