| Summary: | 碩士 === 國立中山大學 === 通訊工程研究所 === 98 === With the escalating demands for optical communication network system, the need for broadband gain medium in optical communication has increased. Among them, Cr4+:YAG crystal has shown an exceptionally successful broadband amplified spontaneous emission (ASE) light source that fully cover 1.2-1.6 μm range (3-dB bandwidth up to 265 nm). More recently, we demonstrated the realization of a waveguiding, low-loss, and low-threshold Cr4+:YAG double-clad crystal fiber (DCF) based ultra-broadband ASE light source, optical amplifier, and laser grown by the co-drawing laser-heated pedestal growth technique. These results demonstrate the potential of the Cr4+:YAG DCF for the replacement of the erbium doped fiber in future optical communications.
To further improve the efficiency of Cr4+:YAG DCF based active devices, here we show the difference in thermal expansion coefficients between a YAG core and an inner cladding creates a significant localized strain field by near-field scanning optical microscope (NSOM), which can result in optical confinement and provide the possibility to simultaneously alter the Cr3+ and Cr4+ fluorescence lifetime with varied core dimensions. The results indicate that There exists a nearly zero strain across the entire core with a diameter of ~20 μm, which is beneficial the higher Cr4+ fluorescence lifetime (+6.43%) and emission cross section (+19.17%) as compared with 11-μm core.
In addition, we have successfully investigated the near-field modal characteristics of Cr4+:YAG DCF laser and ASE by NSOM. The results demonstrate that the Cr4+:YAG DCF laser produced nearly a single-mode (LP01) output with diffraction-limited beam quality of M2 ~1.1; for ASE, the modal weighting of LP01 decreases from 26% to 15% as the number of modes increases from 4 to 7. The results offer a guideline not only for further fabricating Cr4+:YAG DCF tunable lasers, but for efficiently coupling a broadband ASE light source into a single-mode fiber.
|
|---|
