Effect of Hydrogen Inlets on Planar μPEM Fuel Cell Stacks
碩士 === 國立中山大學 === 機械與機電工程學系研究所 === 98 === Planar μPEM Fuel Cell Stacks are designed and fabricated in-house through a deep UV lithography technique, with SU 8 photoresist used as the microstructure mold for the fuel cell flow channel or bipolar plates when micro electroforming. The fuel cell stacks...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2010
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/64501555506355712948 |
| Summary: | 碩士 === 國立中山大學 === 機械與機電工程學系研究所 === 98 === Planar μPEM Fuel Cell Stacks are designed and fabricated in-house through a deep UV lithography technique, with SU 8 photoresist used as the microstructure mold for the fuel cell flow channel or bipolar plates when micro electroforming. The fuel cell stacks use a new design which means installing the fuel channel into PMMA, by which the fuel supply channel becomes convenient and simplified. The performance of the stack is measured in different inlets, and the effect of the hydrogen inlets is explained. The experimental results are presented in the form of polarization VI curves and PI curves for the different types of inlet. Furthermore, the influence of the inlets is presented and discussed.
|
|---|