Investigation of Effectiveness of Applying Cross-Injection Film Cooling Technique to Curved Surfaces

Investigation of Effectiveness of Applying Cross-Injection Film Cooling Technique to Curved Surfaces

碩士 === 大葉大學 === 機械與自動化工程學系 === 98

Bibliographic Details
Main Authors:	Kun-Yu Chen, 陳坤佑
Other Authors:	吳佩學
Format:	Others
Language:	zh-TW
Published:	2010
Online Access:	http://ndltd.ncl.edu.tw/handle/32071493050482728915

Similar Items

Numerical Investigation of Effectiveness of the Film Cooling Technique with Cross Injection at the Endwall of a Straight or Curved Duct
by: Jung Liang Chen, et al.
Published: (2008)

Numerical Investigation of Effectiveness of the Film Cooling Technique with Cross Injection at the Endwall of a Straight or Curved Duct
by: Jung Liang Chen, et al.
Published: (2008)

Film Cooling Performance over Curved Surfaces
by: Min-Sheng Hung, et al.
Published: (2001)

Investigation of Effect of Turbulence Intensity on Cross Injection Film Cooling at the Endwall of a Vane
by: Shen-Ta Tsai, et al.
Published: (2009)

Investigation of Cooling Channel Design for Injection Mold with Free-Form Surface
by: Thomas Chen, et al.
Published: (2016)

Investigation and Analysis of the Vapor Chamber Cooling module Applied in LED
by: Ming-Kun Li, et al.
Published: (2006)

An experimental investigation of film cooling, with particular reference to the injection region
by: Artt, David William
Published: (1970)

Numerical Investigation of Cross-Flow Pump Applied on the PC Water Cooling System
by: Shu-rong Chen, et al.
Published: (2013)

Conjugate Heat Transfer Analysis of Cooling Performance on Curved Surfaces
by: Wu, Chen-Yuan, et al.
Published: (2006)

Large Eddy Simulation of Film Cooling with Triple Holes: Injectant Behavior and Adiabatic Film-Cooling Effectiveness
by: Seung Il Baek, et al.
Published: (2020-11-01)

Numerical Investigation of Film Cooling with Crossing Jets on a Flat Plate
by: Yang-Ya Hui, et al.
Published: (2008)

Investigations on the effect of different influencing factors on film cooling effectiveness under the injection of synthetic coolant
by: Jianlong Chang, et al.
Published: (2021-02-01)

An experimental and numerical investigation of heat transfer downstream of a normal film cooling injection slot
by: Sun, Yuping
Published: (2009)

An experimental and numerical investigation of heat transfer downstream of a normal film cooling injection slot
by: Sun, Yuping
Published: (2009)

An investigation of impingement cooling applied to turbine blade cooling passages
by: Chambers, Andrew
Published: (2003)

Weight saving techniques applied for heat sink in electronic cooling industries
by: Chen, Hong-Long, et al.
Published: (2017)

Effect of cross-flow direction of coolant on film cooling effectiveness with one inlet and double outlet hole injection
by: Guangchao Li, et al.
Published: (2012-12-01)

The investigation on Performance Curve of A Small Centrifugal Cooling Fan
by: Yi Chun Huang, et al.
Published: (2005)

Freestream turbulence intensity effect on the film cooling performance on a inclined film-cooled surface
by: LIN,ZHI-LONG, et al.
Published: (1991)

Effect of combined hole configuration on film cooling with and without mist injection
by: Tian Ke, et al.
Published: (2018-01-01)

Effect of Inlet Compound Angle of Backward Injection Film Cooling Hole
by: Yoon Seong Jeong, et al.
Published: (2020-02-01)

Film-cooling in the presence of mainstream pressure gradients and foreign gas injection
by: Teekaram, Arnold J. H.
Published: (1989)

Measurement Technique of the Smoothness of Curved Surface
by: 林鴻昱
Published: (1989)

Polynomial Techniques in Curve and Surface Fitting
by: Abdelli, H.
Published: (1975)

Effects of Surface Conditions on Endwall Film-Cooling
by: Sundaram, Narayan
Published: (2014)

Smooth Investigation on Curve and Surface
by: TSAI, MENG-CHUNG, et al.
Published: (2001)

Investigations On Film Cooling At Hypersonic Mach Number Using Forward Facing Injection From Micro-Jet Array
by: Sriram, R
Published: (2010)

The Research of Environment of Distributed Structure Applied to Global Wargame Systems
by: Chen Kun-You, et al.
Published: (2007)

The Elliposometric Measurements of a curved surface
by: Chen Yo Lee, et al.
Published: (2007)

Numerical study on film cooling mechanism and characteristics of cylindrical holes with branched jet injections
by: Yu Yao, et al.
Published: (2013-03-01)

Experimental Research on PVDF Sensing Surface Characteristic Curve Applied to Topography Perception
by: Zhen Yu, et al.
Published: (2020-10-01)

Investigation of Geometric Characteristics in Curved Surface Laser Cladding with Curve Path
by: Guofu Lian, et al.
Published: (2019-08-01)

Effect of Turbulence Intensity on Cross-Injection Film Cooling at a Stepped or Smooth Endwall of a Gas Turbine Vane Passage
by: Pey-Shey Wu, et al.
Published: (2014-01-01)

Computational research on film cooling performance of different shaped holes with backward and forward injection
by: Zi-chen Zhao, et al.
Published: (2019-05-01)

Idealized Curved Surface for Representing the Basal Surfaceby Slope Failure of Sliding Type
by: Kun-DingLee, et al.
Published: (2019)

Flat-Plate Film Cooling through Conical Holes with Compound- angle Injection
by: lee, Szu-Hsien, et al.
Published: (1997)

Study on Injection Molding of Freeform Surfaces Lens with Shrinkage Compensation
by: SIAO, KUN-YOU, et al.
Published: (2017)

Laser-based investigation into injection, formation and flow processes of ethanol films on metal surface
by: Huinan Yang, et al.
Published: (2019-03-01)

The Study of Conformal Cooling Design to Improve The Cooling Efficiency of an Injection Mold
by: Yu-Chun Lo, et al.
Published: (2016)

Experimental investigation into unsteady effects on film cooling
by: Fawcett, Richard J., et al.
Published: (2012)