Design and Manufacture of Checking Gauge Applied in Aluminum Alloy Protective Shield for Automotive Starting Motors

Design and Manufacture of Checking Gauge Applied in Aluminum Alloy Protective Shield for Automotive Starting Motors

Show other versions (1)

碩士 === 國立屏東科技大學 === 機械工程系所 === 97 === Abstract Student ID: M9632004 Title of Thesis:Design and Manufacture of Checking Gauge Applied in Aluminum Alloy Protective Shield for Automotive Starting Motors. Total Pages:96 Name of Institute: National Pingtung University of Science and Technology Name of De...

Full description

Bibliographic Details
Main Authors:	Chien Jung Lee, 李健榮
Other Authors:	Yi-Hong Lin
Format:	Others
Language:	zh-TW
Published:	2009
Online Access:	http://ndltd.ncl.edu.tw/handle/85693212161413516081

Similar Items

Design and Manufacture of Checking Gauge Applied in Aluminum Alloy Protective Shield for Automotive Starting Motors
by: Chien Jung Lee, et al.

Research on Increasing the Productivity of Aluminum Alloy Protective Shields for Automotive Starting Motors
by: Chen Jen-Yang, et al.

ALUMINUM ALLOY WELDING IN AUTOMOTIVE INDUSTRY
by: Bożena SZCZUCKA-LASOTA, et al.
Published: (2020-09-01)

Model-checking and Model-based Testing of Automotive Embedded Systems : Starting from the System Architecture
by: Marinescu, Raluca
Published: (2014)

Applying Six Sigma to Tenneco Automotive manufacturing
by: Kang, John (John Y.), 1972-
Published: (2005)

Applying lean manufacturing in an automotive stamping plant
by: Welnick, Richard J. (Richard John), 1968-
Published: (2014)

Shielding Effectiveness of Superalloy, Aluminum, and Mumetal Shielding Tapes
by: Cheung, Cindy Suit
Published: (2009)

Determining the Influence of the Type of Shielding Gas during Additive Manufacturing of an Aluminum Alloy by Monitoring the Process Qualitatively and Analyzing Process Byproducts Quantitatively
by: Kleemeyer, Stefanie Desiree
Published: (2021)

Study of the effect of brazing on mechanical properties of aluminum alloys for automotive heat exchangers
by: Velu, Praveen Kumaar
Published: (2017)

Microstructure and fatigue properties of extruded aluminum alloys 7046 and 7108 for automotive applications
by: C.S. Hattori, et al.
Published: (2021-09-01)

Effects of heat treatment on thermal stability and surface properties of aluminum automotive alloys
by: Kent-Yi Lee, et al.
Published: (2012)

Study of Friction Stir Welding Deformations of Automotive 6061-T6 Aluminum alloy
by: Wei-Chun Hung, et al.
Published: (2010)

Anticipating impacts of introducing aluminum-cerium alloys into the United States automotive market
by: Imholte, D.D, et al.
Published: (2019)

Surface Treatment for Additive Manufactured Aluminum Alloys
by: Gavelius, Marianne, et al.
Published: (2020)

Research progress in aluminum alloy additive manufacturing
by: GAO Qing-wei, et al.
Published: (2019-11-01)

Stability checking method of pressure bars for suspended aluminum alloy single-piece bulkhead
by: WU Jianguo, et al.
Published: (2020-04-01)

Image processing technology applied in checking defects of PLED manufacture
by: Jyh-Chyang Chen, et al.
Published: (2003)

EVALUATION OF REUSING AND/OR RECYCLING OF POLYCARBONETE USED IN AUTOMOTIVE SHIELDING
by: DIOGO PIRES REIS
Published: (2014)

Influence of Additional Trace Elements on the 6000 Series Aluminum Alloys for Automotive Sheet Material
by: Chuang, Ming-You, et al.
Published: (1997)

Effect of Manufacture Parameters of Friction Stir Welding on the Joining Properties of 5083-O Aluminum Alloy
by: 林榮立
Published: (2005)

A Micromechanical Model of Additively Manufactured Aluminum Alloys
by: Emelianova Evgeniya, et al.
Published: (2019-01-01)

FATIGUE AND FRACTURE BEHAVIOR OF LPBF MANUFACTURED ALUMINUM ALLOY
by: Luke SUTTEY, et al.
Published: (2019-06-01)

The impact of the Motor Industry Development Programme on the competitiveness of automotive component manufacturers
by: Kok, Leo
Published: (2013)

Bearing capacity check of aluminum profiles
by: Cristian Grigoraşenco
Published: (2013-06-01)

MODELING AND OPTIMIZATION OF MACHINING PERFORMANCE MEASURES IN FACE MILLING OF AUTOMOTIVE ALUMINUM ALLOY A380 UNDER DIFFERENT LUBRICATION/COOLING CONDITIONS FOR SUSTAINABLE MANUFACTURING
by: Kardekar, Abhijit Dilip
Published: (2005)

Life-Cycle and Energy Assessment of Automotive Component Manufacturing: The Dilemma Between Aluminum and Cast Iron
by: Konstantinos Salonitis, et al.
Published: (2019-07-01)

[en] EVALUATION OF REUSING AND/OR RECYCLING OF POLYCARBONETE USED IN AUTOMOTIVE SHIELDING
by: DIOGO PIRES REIS
Published: (2015)

Residual Stress Analysis of a 2219 Aluminum Alloy Ring Using the Indentation Strain-Gauge Method
by: Yunlong Ma, et al.
Published: (2020-07-01)

Distributed gauging methodologies for variation reduction in the automotive body shop
by: York, Robert Eugene
Published: (2006)

Optimal Process Conditions for the Manufacture of Aluminum Alloy Bicycle Pedals
by: Dyi-Cheng Chen, et al.
Published: (2014-09-01)

Process Performance Analysis and Improvement for the Manufacture of 6063 Aluminum Alloy
by: Chang-Hsien Hsu
Published: (2020-05-01)

Manufacturing and Aging Properties of Submicro Particulate Reinforced Aluminum Alloy
by: ChouLong Ma, et al.
Published: (2000)

Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing
by: Geir Langelandsvik, et al.
Published: (2021-09-01)

Thermal Processing of Powder Aluminum Alloys for Additive Manufacturing Applications
by: Walde, Caitlin
Published: (2018)

Production of Aluminum Alloy Powder by Gas Atomization for Additive Manufacturing
by: Wei-ChiehTseng, et al.
Published: (2015)

Frictional Effect on Ultrasonic-Vibration Forming of Aluminum Alloy
by: Jung-Chung Hung, et al.
Published: (2006)

R-HPDC Process with Forced Convection Mixing Device for Automotive Part of A380 Aluminum Alloy
by: Bing Zhou, et al.
Published: (2014-04-01)

Study on the flange forging of A6061 aluminum alloy and AZ61 magnesium alloy
by: Chi-Jung Chen, et al.
Published: (2003)

An economic analysis of aluminum sheet production and prospects of aluminum for the automotive unibody
by: Hoegh, Harald, 1976-
Published: (2011)

Third party logistics in Chinese automotive industry : a case study of a Chinese automotive manufacturer-Shanghai General Motors
by: Zhang, Luying, et al.
Published: (2012)