| Summary: | 碩士 === 國立高雄海洋科技大學 === 輪機工程研究所 === 97 === This paper investigates the free vibration characteristics of a beam carrying multiple two-degree-of-freedom (two-dof) spring-mass systems (i.e., the loaded beam). Unlike the existing literature to neglect the inertia effect of the helical springs of each spring-mass system, this paper takes the last inertia effect into consideration. To this end, a technique to replace each two-dof spring-mass system by a set of rigidly attached equivalent masses is presented, so that the free vibration characteristics of a loaded beam can be predicted from those of the same beam carrying multiple rigidly attached equivalent masses. In which, the equation of motion of the loaded beam is derived analytically by means of the expansion theorem (or the mode superposition method) incorporated with the natural frequencies and the mode shapes of the bare beam (i.e., the beam carrying nothing). In addition, the mass and stiffness matrices including the inertia effect of the helical springs of a two-dof spring-mass system, required by the conventional finite element method (FEM), are also derived. All the numerical results obtained from the presented equivalent mass method (EMM) are compared with those obtained from FEM and satisfactory agreement is achieved. Because the equivalent masses of each two-dof spring-mass system are dependent on the magnitudes of its lumped mass, spring constant and spring mass, the presented EMM provides an effective technique for evaluating the overall inertia effect of the two-dof spring-mass systems attached to the beam. Furthermore, if the total number of two-dof spring-mass systems attached to the beam is large, then the order of the overall property matrices for the equation of motion of the loaded beam in EMM is much less than that in FEM and the computer storage memory required by the former is also much less than that required by the latter.
|
|---|
