Research on Volume Shrinkage Behavior of Liquid Compound

Research on Volume Shrinkage Behavior of Liquid Compound

碩士 === 國立成功大學 === 工程科學系碩博士班 === 97 === In this study, the relationship between conversion, pressure, volume shrinkage and temperature of Liquid compound was mainly investigated. Liquid compound which is one of thermosetting material would produce crosslinking during the heating. The crosslinking is...

Full description

Bibliographic Details
Main Authors:	Chia-Yi Ho, 何嘉益
Other Authors:	Huei-Huang Lee
Format:	Others
Language:	zh-TW
Published:	2009
Online Access:	http://ndltd.ncl.edu.tw/handle/63930159256430134105

Similar Items

Study of Isothermal and Isobaric Volume Shrinkage for Epoxy Molding Compound
by: Yi-San Chang, et al.
Published: (2005)

Volume Shrinkage Characterization of Underfill Materials
by: Chi-Jie Chang, et al.
Published: (2008)

Study of Shrinkage Behavior of High Strength Concrete and High-Volume Fly Ash Concrete
by: Chiang, Ying-Yi, et al.
Published: (2010)

Study and Measurement of Volume Shrinkage for Underfill Encapsulants
by: Tz-Bin Lin, et al.
Published: (2006)

Shrinkage Characteristics and Internal Pigmentability of
by: Ching-Chuen Ho, et al.
Published: (1996)

Volume Shrinkage Induced by Interfacial Reaction In Micro Joints
by: Cheng-Chieh Li, et al.
Published: (2014)

Experiment Research of the Strength and Shrinkage Behavior of Cement Mortar with Hydrogel
by: Chang Chen Yen, et al.
Published: (2014)

Investigation of finite element mesh quality and 3D volume shrinkage compensation method in core and cavity design for optical lenses
by: Chia-Hsuan Tsai, et al.
Published: (2019)

Behavior of Drying Shrinkage Crack of Mass Concrete
by: CHEN YI -FENG, et al.
Published: (2001)

Predicting the volume shrinkage while manufacturing the GTE turbine blades
by: Vdovin Roman
Published: (2019-01-01)

The simulation of volume shrinkage for double-injection molding with PC and ABS
by: Leklong Pichai, et al.
Published: (2018-01-01)

Spiroorthocarbonate as shrinkage resistance for UV-curing 3D printing: UV-curing kinetics, mechanical properties and volume shrinkage
by: G. H. Lin, et al.
Published: (2021-12-01)

Plastic shrinkage cracking in conventional and low volume fibre reinforced concrete
by: Combrinck, Riaan
Published: (2011)

Plastic shrinkage cracking in conventional and low volume fibre reinforced concrete
by: Combrinck, Riaan
Published: (2012)

A study of the WNT/β-catenin regulatory mechanisms and development of ovatodiolide as a novel targeting compound in renal cell carcinoma
by: Jar Yi Ho, et al.
Published: (2013)

The study on the thermal shrinkage behavior of plastic lense
by: Hsien, Yung-Cheng, et al.
Published: (1997)

Analyses of Shrinkage Variations at the Sharply Contracted Section of Ceramic Injection Moldings
by: Chi-Hung Ho, et al.
Published: (2001)

The influence of shrinkage reducing admixtures on plastic shrinkage
by: J. Mora, et al.
Published: (2003-12-01)

Influence of various nature diluents on volume shrinkage kinetics of the epoxy oligomer at curing
by: K. S. Pakhomov, et al.
Published: (2014-02-01)

THE INFLUENCE OF DILUENTS ON THE KINETICS OF VOLUME SHRINKAGE AND STRESS UPON CURING OF EPOXY OLIGOMERS
by: A. N. Trofimov, et al.
Published: (2016-12-01)

Drying Shrinkage of Mortar Incorporating High Volume Oil Palm Biomass Waste
by: Abdul Shukor Lim Nor Hasanah, et al.
Published: (2018-01-01)

Application of a variable volume mold to the shrinkage control of injection molded parts.
by: Halstead, Whitfield Gardner
Published: (2005)

Early age volume changes in concrete due to chemical shrinkage of cement paste
by: L. Ebensperger, et al.
Published: (1991-12-01)

A study of the Taichung city shrinkage: A principal component analysis approach
by: Yueh-Ling,Ho, et al.
Published: (2016)

RESEARCH ON THE CONTENT AND FILLER TYPE ON INJECTION SHRINKAGE
by: Tomasz Jachowicz, et al.
Published: (2014-09-01)

Reasons and Premises for the Shrinkage in Timişoara. Research Note
by: Melinda Dincă
Published: (2010-07-01)

A New Class of Shrinkage-Type Nonparametric Tests for Multiple Hypothesis Testing
by: Hung-Chi Ho, et al.
Published: (2004)

Investigation of the effects materials parameters on the shrinkage behavior of concrete
by: Lu, Yu-Shan, et al.
Published: (1997)

The Study of Substrate Warpage in QFN Package due to Shrinkage Rate of Molding Compound
by: HSIEN HIN LIU, et al.
Published: (2015)

Study on the Creep and Shrinkage Behavior of High-Performance Concrete
by: Andrian Hartanto Limongan, et al.
Published: (2016)

The role of shrinkage reducing admixtures and supplementary cementitious materials in volume stability and strength development
by: Papayianni Ioanna, et al.
Published: (2019-01-01)

Effects of Shrinkage Reducing Agent and Expansive Admixture on the Volume Deformation of Ultrahigh Performance Concrete
by: Su Anshuang, et al.
Published: (2017-01-01)

An investigation into the use of low volume - fibre reinforced concrete for controlling plastic shrinkage cracking
by: Maritz, Jaco-Louis
Published: (2012)

Liquidity shrinkages and incomplete financial participation in dynamic economies with asset-backed securities
by: Sepúlveda Cortés, Fabián Alejandro
Published: (2017)

Shrinkage of Injection Molding and Close-fitting of Plastic Bottle Caps
by: 何書偉
Published: (1999)

Comparative study of shrinkage and non-shrinkage model of food drying
by: Jamil, N., et al.
Published: (2016)

Vapor-Liquid Equilibrium of Nitrogen in Coal-Liquid Model Compounds
by: 王嘉賢
Published: (2002)

Addition of Polymer Material Slows Dry Shrinkage Behavior of Geopolymer
by: Syu, Yu-Wei, et al.
Published: (2018)

Shrinkage Behavior of Self-Compacting Concrete at Very Early Age
by: Guan-Hong Chen, et al.
Published: (2018)

Effect of Creep and Shrinkage on the Behavior of Segmental Concr- ete Bridges
by: Chang,Cheng-Hsin, et al.
Published: (1993)