Development and Analysis of AE Signal Generation Model in Micro-milling

Development and Analysis of AE Signal Generation Model in Micro-milling

碩士 === 國立中興大學 === 機械工程學系所 === 97 === In micro-cutting machining, various kinds of signals variated because of the tool wear can be detected with the sensors. Among them, acoustic emission signal is a high frequency signal that distributed in the range from several dozen kHz to several dozen MHz, gen...

Full description

Bibliographic Details
Main Authors:	Chien-Wei Hung, 洪健為
Other Authors:	Ming-Chyuan Lu
Format:	Others
Language:	zh-TW
Online Access:	http://ndltd.ncl.edu.tw/handle/98003241560652098405

Similar Items

Study of Vibration and AE Signals for Tool Wear Monitoring in the Micro Milling
by: Yao-Hsien Huang, et al.
Published: (2010)

Experimental Study of the Cutting Performance and AE Signal Generation for Silicon Wafer Micro Milling with Diamond Coated Tool
by: Kuan-Mien Chang, et al.
Published: (2018)

Development and Analysis of AE Signal Generation Model for Tool Wear Monitoring in Turning
by: Jhong-Kai Tian, et al.
Published: (2011)

The development of tool condition and cutting quality monitoring in PZT/Si wafer micro milling by Neural Network and AE signal
by: Ling-Fang Chang, et al.
Published: (2014)

Analysis of AE Signals and Sensor Locations between Turning and Milling Processes for Tool Wear Monitoring
by: Han-Po Shih, et al.
Published: (2013)

Analysis of Cutting Path Effect on Spindle AE and Vibration Based Tool Wear Monitoring System in Micro Milling
by: Ci-Rong Huang, et al.
Published: (2012)

The Study of Modified Micro-milling Force Model and Life Analysis for Micro End-mill
by: Wei-chou Huang, et al.
Published: (2008)

Wind-Mill Micro-Power Generator
by: Lin, Yuan-Chih, et al.
Published: (2012)

Audio Encryptions for AES 8-bit Shift Register Implementation and Analysis
by: Chien-Lun Yen, et al.
Published: (2010)

The machine design and flow analysis of the cyclone micro mill machine
by: Hung cheng yu, et al.
Published: (2010)

CAN BUS with AES Encrypt
by: Chuan-Chia Hung, et al.
Published: (2018)

Modelling of the Influence of Tool Runout on Surface Generation in Micro Milling
by: Wanqun Chen, et al.
Published: (2019-01-01)

AES Design Space Exploration with an IP Generator
by: Chi-wei Chu, et al.
Published: (2005)

Application Of AE Technique In Monitoring Of Micro Drilling
by: Huang-Chung Hsien, et al.
Published: (2010)

Wireless Physiological-Signal Transmission System with AES and RSA joint encryption algorithm
by: Wei-Hung Tsai, et al.
Published: (2010)

Modified Micro-Mill Force Model and Parameter Optimizing for Micro End-Mill
by: Min-Chang Jang, et al.
Published: (2009)

The implementation of AES data security system based on Linux embedded development platform
by: Su-Min Hung, et al.
Published: (2013)

AES development in FPGA
by: Horacio A. Villagarcía Wanza
Published: (2006-10-01)

The development of a manufacturability analysis system for micro-milling
by: Abdul Shukor, Syaimak
Published: (2010)

RK-AES: An Improved Version of AES Using a New Key Generation Process with Random Keys
by: Rahul Saha, et al.
Published: (2018-01-01)

Generating Standardized Audio Technical Metadata: AES57
by: Jody L. DeRidder
Published: (2015-10-01)

Applications of Spindle Vibration and AE Signal for Tool Condition Monitoring in Drilling
by: Yu-Wei Hsu, et al.
Published: (2012)

Shaft Crack Identification Based on Vibration and AE Signals
by: Wenxiu Lu, et al.
Published: (2011-01-01)

Research on the Propagation of AE Signals in Helicopter Structural Components
by: Urbahs Aleksandrs, et al.
Published: (2016-12-01)

Development of tool wear monitoring system in the micro milling using vibration signal and Neural Network
by: Wan-Hao Hsieh, et al.

Analysis of Cutting Force and AE Signals for Cutting Performance in Mechanical Cutting of Ceramics.
by: Li-Ting Yang, et al.
Published: (2017)

The Correlation Between Vibration Signals and Workpiece Surface Roughness in Milling
by: Pei-Chih Hung, et al.
Published: (2018)

Analysis of Acoustic Emission (AE) Signals for Quality Monitoring of Laser Lap Microwelding
by: Ming-Chyuan Lu, et al.
Published: (2021-07-01)

Study of Current and Vibration Signals for Monitoring Tool Wear in Micro Milling
by: Men Huang, et al.
Published: (2016)

Analysis of Structural Genomic Diversity in Aegilops umbellulata, Ae. markgrafii, Ae. comosa, and Ae. uniaristata by Fluorescence In Situ Hybridization Karyotyping
by: Zhongping Song, et al.
Published: (2020-06-01)

The optimal design of micro End-mill for milling SKD61 tool steel
by: Yao-Hung Zheng, et al.
Published: (2009)

Quantum Security Analysis of AES
by: Xavier Bonnetain, et al.
Published: (2019-06-01)

Hardware Implement of AES
by: Wei-Ren ,Tsai, et al.
Published: (2008)

The Research on the Chip Thickness and Milling Force Model inMicro-End-Milling
by: Yi-Ming Chen, et al.
Published: (2006)

A characteristic study of AE signals under corrosive environment
by: CHEN,RONG-TING, et al.
Published: (1990)

Research on the Attenuation Characteristics of AE Signals of Marble and Granite Stone
by: Haiyan Wang, et al.
Published: (2020-01-01)

Study on the Mathematical Model and Propagation Characteristics of AE Waveform Signals during Rock Fracture
by: Xun You, et al.
Published: (2021-01-01)

Mathematical Models of the Geometry of Micro Milling Cutters
by: Isaev Alexander, et al.
Published: (2021-01-01)

Micro milling process modeling: a review
by: Mamedov Ali
Published: (2021-01-01)

Development of the Numerical Control Program for Turn/Mill Machine Tools
by: Chih-Wei Hung, et al.
Published: (2007)

Cannot write session to /tmp/vufind_sessions/sess_ihnpec2sdrdghe9mbvj5j2un5n