The Study of Process Parameter Optimization in the Rapid Manufacturing System

• Main Authors: Hui-Yuan Su, 蘇暉原
• Other Authors: none
• Format: Others
• Language: zh-TW
• Published: 2009
• Online Access: http://ndltd.ncl.edu.tw/handle/24774984096283657392

碩士 === 逢甲大學 === 機械工程學所 === 97 === The Rapid Prototyping Technology used layered manufacturing technology in order to assist on the production of complicated prototypes, reduction on the development time, and improve product quality. There are various types of RP machine, and the materials of their end product produced are limited. The RT is the extension of RP process. By integrate the RP and RT effectively; it will optimize the production process of the end production, which is the purpose of this research. This research adopts the designed CAD picture file of Taguchi method, under the condition of the RP, to select the control factors. As the parameter optimal conditions of the RPdeformation have obtained, then the optimal model would perform RP of the Taguchi method to select the appropriate control factors. After the parameter optimization of mold have been obtained, it would then provide feasible improvement suggestions basing on the outcome. The experiment result have proved that by using the Taguchi method, it would effectively reduce the deformation of model and deformation of the RP and mold of the RT respectively.