Passive harmonic filter planning in a power system using cumulant method and immune algorithm

碩士 === 中原大學 === 電機工程研究所 === 97 === Abstract The power quality in the industry distribution system becomes deteriorated due to harmonic pollution. Many researches have been proposed for investigating the passive filter planning to reduce harmonic voltage distortion. The harmonic currents, impedance,...

Full description

Bibliographic Details
Main Authors: Wun-Jhih Liao, 廖文智
Other Authors: Ying-Yi Hong
Format: Others
Language:zh-TW
Published: 2009
Online Access:http://ndltd.ncl.edu.tw/handle/89810716320977941099
Description
Summary:碩士 === 中原大學 === 電機工程研究所 === 97 === Abstract The power quality in the industry distribution system becomes deteriorated due to harmonic pollution. Many researches have been proposed for investigating the passive filter planning to reduce harmonic voltage distortion. The harmonic currents, impedance, and voltage in a power system are non-deterministic in nature. If the installation of passive filetrs is made according to the worst of harmonic current scenario, the results may be inaccurate. In addition, this may cause extra expenses or not satisfy harmonic standard. Considering the effects of time variations of harmonic current and impedance, this thesis presents a new approach for planning single-tuned harmonic passive filters in a power system with considering cumulant characteristics. In the proposed method, the quantitative parameters in cumulant are determined once any probability distribution is given. Next, we use the constrained programming model based on the 95% cumulative distribution function. The problem is solved by a Adaptive Dynamic Clone Selection Algorithm-based optimizer. The objective is to minimize the capacitor banks installation cost, while the harmonic standard limits are satisfied. An 18-bus system is used as a test system for showing the applicability of the proposed method. The results are investigated for examining performance of the proposed method.