| Summary: | 碩士 === 中原大學 === 機械工程研究所 === 96 === Abstract
This research combines the simulation analysis of Taguchi Methods and finite element software ANSYS, as to optimal structural of the contact deform design in connector product, do the complete discussion with an instance to offer a method of design parameters optimization.
According to the experience rule in the connector product design at first, with a volume of RJ45 as research specimen, and design the contact. With the geometry dimensions control factor, regard as the quality characteristic with the deformation after insertion and withdrawing. This research selects L9(34) orthogonal array to establish nine groups finite element model, and analyzes the deformation of the materials thickness with ANSYS, and finds out the optimum design with Taguchi Methods.
The preliminary achievement of this research shows the RJ45 ‘s contact yield rate still can to accept after reduce the volume, offer the reference of designing connector’s contact to industry, can shorten the cycle for product development even more.
|
|---|
