The analysis of phase transformation and mechanical properties of the Fe-11Cr-8.5Co-8Ni-5Mo-1.25Al alloy

The analysis of phase transformation and mechanical properties of the Fe-11Cr-8.5Co-8Ni-5Mo-1.25Al alloy

碩士 === 國立屏東科技大學 === 機械工程系所 === 95 === Student ID: N9432001 Title of Thesis: The Analysis of Phase Transformation and Mechanical Properties of the Fe-11Cr-8.5Co-8Ni-5Mo-1.25Al alloy Total Pages:56 Name of Institute: National Pingtung University of Science and Technology Name of Department: Department...

Full description

Bibliographic Details
Main Author:	徐文光
Other Authors:	趙志燁
Format:	Others
Language:	zh-TW
Published:	2007
Online Access:	http://ndltd.ncl.edu.tw/handle/19231862986900391004

Similar Items

Grain Size Effect on the Mechanical Behavior of Metastable Fe-23Cr-8.5Ni Alloy
by: Lin Xie, et al.
Published: (2019-06-01)

Phase Transformations of the Fe-12Cr-11Ni-1.5Ti-1 Mo alloy
by: Kai-Jen Ku, et al.
Published: (2008)

Analysis the Microstructures of the Fe-8.5Al-26Mn-0.5C-13Cr Alloy
by: Yuan-Da You, et al.
Published: (2005)

Phase Transformations of the Fe-25Cr-6Ni-2.5Cu Alloys
by: Feng-Yao Lin, et al.
Published: (2010)

The study of the properties of the Fe-8.5Al-28Mn-1.0Si-5.0Cr alloy
by: 吳蜀鴻
Published: (2004)

Phase transformation in Fe-30Mn-8.5Al-5Ti-1C alloy
by: CHEN PO CHIH, et al.
Published: (2007)

8.5
by: Volk, Jonathan
Published: (2014)

The characteristic analysis of the Fe-14Cr-7Ni-8W-4Mo alloy
by: Cheng, Shao-Chien, et al.
Published: (2007)

Impact strength of GX8CrNi12, GX5CrNi18-9 and GX5CrNiMo19-11-2 cast steel at - 30 °C
by: B. Kalandyk, et al.
Published: (2016-10-01)

Effect of Mo concentration and aging time on the magnetic and mechanical hardness of Fe-xMo-5Ni-0.05C alloys (x = 5, 8, 11 and 15 wt. (%))
by: Mauro Carlos Lopes Souza, et al.
Published: (2009-01-01)

Phase transformations in Fe-8.0Al-28.5Mn-(5,10)Cr alloys
by: Chao-Nan Chou, et al.
Published: (2002)

Influence of Annealing on the Microstructures and Oxidation Behaviors of Al8(CoCrFeNi)92, Al15(CoCrFeNi)85, and Al30(CoCrFeNi)70 High-Entropy Alloys
by: Todd M. Butler, et al.
Published: (2016-09-01)

Characterization of Ti-25.5Al-13.5Nb-2.8Mo-1.8Fe Alloy Hot Deformation Behavior Through Processing Map
by: Jun Cheng, et al.
Published: (2020-02-01)

Mechanically Alloyed CoCrFeNiMo<sub>0.85</sub> High-Entropy Alloy for Corrosion Resistance Coatings
by: Laura Elena Geambazu, et al.
Published: (2021-07-01)

1. Astronomical photometry at wavelengths of 8.5, 10.5, and 11.6 µm. 2. Infrared emission from asteroids at wavelengths of 8.5, 10.5, and 11.6 µm
by: Matson, Dennis Ludwig
Published: (1972)

'Teraz' u Parminidesa: B 8.5 ('NOW' ACCORDING TO PARMENIDES: B 8.5)
by: Jerzy Pawliszcze
Published: (2008-06-01)

Crystal structure of the Al8Cr5-type intermetallic Al7.85Cr5.16
by: Xu Geng, et al.
Published: (2020-04-01)

Understanding microstructural evolution and hardness of nanostructured Fe89.5Ni8Zr2.5 alloy produced by mechanical alloying and pressureless sintering
by: Gökhan POLAT, et al.
Published: (2020-10-01)

The Study of static and cyclic Creep behavior of 1.25Cr-0.5Mo Steel Pipe
by: Chum-Chih Shih, et al.
Published: (2004)

Dislocation Characterization on Fe-15Cr-5Ni-5Mn Alloy
by: Pei-Wei Gung, et al.
Published: (2011)

The Characteristic Analysis of the Fe-10Ni-5Cr-1Co-1Mn-1Mo-0.8Ti-0.8Nb-0.3Al-0.1C Alloy
by: Chin-Fu Chen, et al.
Published: (2008)

Hardening Mechanism in a MG 8.5 Wt.% Al Alloy
by: Gharghouri, M., et al.
Published: (1993-12-01)

The study of phase transformations in CoCrFeNi and CoCrFeNiAl0.5 high entropy alloys
by: Kuan-Chieh Fang, et al.
Published: (2019)

Phase transformations in an Fe-8.8Al-30.0Mn-6.0Mo-1.1C alloy
by: Sheng-Yu Yang, et al.
Published: (2000)

The characteristic analysis of the Ni-19Fe-17Cr-5Nb-3Mo-1Ti-0.5Al alloy
by: 何松陽
Published: (2007)

Experimental study of the creep lifetime of the butt-welded 1.25Cr0.5Mo steel pipes
by: Zehsaz M., et al.
Published: (2010-06-01)

The Analysis of Phase Transformation of the Fe-8.7Al-28.3Mn-1C-5.5Cr Alloy
by: Yu,Chih-Hua, et al.
Published: (2006)

Study on Fe-5Cr-4.5Ni-2Mo-0.5Ti-0.3Al-0.2C Alloy
by: Chun-Kuo Wang, et al.
Published: (2009)

The Microstructural Difference and Its Influence on the Ballistic Impact Behavior of a Near β-Type Ti5.1Al2.5Cr0.5Fe4.5Mo1.1Sn1.8Zr2.9Zn Titanium Alloy
by: Xinjie Zhu, et al.
Published: (2020-09-01)

Study of the Forged Capability of Ti-4.5Al-3Cr-1.8Mo-1V-0.6Fe Alloy
by: Tsai-Wsu Wu, et al.
Published: (2009)

Study of the Forged Capability of Ti-4.5Al-3Cr-1.8Mo-1V-0.6Fe Alloy
by: Tsai-Wsu Wu, et al.

Phase Transformation on Ni-18Cr-15Fe-5Nb-3.5Mo-3Co-1.4Ti-1Al Alloy
by: Chang-An Chen, et al.
Published: (2010)

Phase Transformation of the Fe-15Cr-3Ni-1.5Cu alloy
by: I-Hsing Chung, et al.
Published: (2009)

Phase Transformation of the Fe-15Cr-3Ni-1.5Cu alloy
by: I-Hsing Chung, et al.

Thermodynamic Alloy Design of High Strength and Toughness in 300 mm Thick Pressure Vessel Wall of 1.25Cr-0.5Mo Steel
by: Hye-sung Na, et al.
Published: (2018-01-01)

Phase Transformations on the Ti-4.5Al-3Cr-1.8Mo-1V-0.6Fe
by: Li-Ching Wing, et al.
Published: (2010)

The Characteristic Analysis of the Fe-16.5Cr-xNi Alloys
by: Li, Ming-Chi, et al.
Published: (2008)

The Effects of Mo and Nb on the Microstructures and Properties of CrFeCoNi(Nb,Mo) Alloys
by: Chun-Huei Tsau, et al.
Published: (2018-08-01)

Microstructure and Thermal Analysis of Metastable Intermetallic Phases in High-Entropy Alloy CoCrFeMo<sub>0.85</sub>Ni
by: Zihui Dong, et al.
Published: (2021-02-01)

Effect of Microstructural Modifications on the Corrosion Resistance of CoCrFeMo<sub>0.85</sub>Ni Compositionally Complex Alloy Coatings
by: Francesco Fanicchia, et al.
Published: (2019-10-01)

Cannot write session to /tmp/vufind_sessions/sess_gq9brqtmku6oasjr7bvehkt4vi