| Summary: | 碩士 === 元智大學 === 管理研究所 === 94 === How to improve the efficiency of the macroevolution to promote the Green? In order to go with the stream of the International Green Action Plan. All the electronic and machinery products export from Taiwan to the European Union need to meet with the three major environmental protection instructions in: RoHS, WEEE, and EuP. These three major issues have a great impact on the manufacturers. In order to avoid the increasing product environment protection problems, the European Union has set for a law to request the enterprise to bear the same responsibility to improve the efficiency of the action plan by reduce, re-generate and recycle the waste materials during the productions. Due to those concerns, this thesis is going to discuss on: how can the manufactures to use their schemes to reduce and reuse the waste materials, how can they recycle and reuse those waste materials and at the same time to improve operators/workers’ green environments concepts to meet with the WEEE requirements. Furthermore, this thesis is going to take a look on what are the benefits can manufactures gain from during the working process under the RFID monitor, and what are the regulations required from the suppliers and recycling merchants on the environmental protection issues to perform and achieve the Green plan action.
The study of this thesis is base on the past relevant literature on the recycling and reuses method to compare the current method on the recycling, and look at what are the merchants’ working procedures on the recycling and what are the befits and functions if their use RFID on the working procedures, base on the suppliers’ back and forth checking theory to discuss the efficiency of the monitors for the recycling; According to those studies to explain how can a merchant to create Green Management Policy or Systems. In addition, this thesis also carries out FMEA (Failure Mode & Effects Analysis) to bring out the major factors in the cost risk during the productions period. This thesis also use UML diagram to explain how to simplify the production procedures, consignment procedures, stocking procedures and the recycling procedures.
According to what we discovery in this thesis, it shows that:
1. The RFID technique really provides the best method for the recycling procedures.
2. Since lead-in the RFID technique into the working procedures, the manufactures, government and the recycling merchants are all benefit from it.
3. To set up the WEEE monitor working procedures can help enterprise to reappraise their management skills, enhance to expand their ascendant manage power and become more competitively and valuable compares to their competitors.
|
|---|
