Vibration Reduction of Reciprocating Compressors byUsing Taguchi’s Parameter Design Methods
碩士 === 大同大學 === 機械工程學系(所) === 94 === ABSTRACT This article mainly describes the vibration characteristic for the reciprocating compressor and to find out the best parameter to decrease its vibration. In the known parameter of reciprocating compressor geometry size, operating condition, the MATLAB so...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | en_US |
| Published: |
2006
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/37329984175134539111 |
| Summary: | 碩士 === 大同大學 === 機械工程學系(所) === 94 === ABSTRACT
This article mainly describes the vibration characteristic for the
reciprocating compressor and to find out the best parameter to decrease its
vibration.
In the known parameter of reciprocating compressor geometry size,
operating condition, the MATLAB software with the computer value method
was adopted to analyze the reciprocating and rotating inertial force on
mechanism such as piston and rod in the reciprocating compressor.
The affiliation by the MATLAB software may easily change the related
parameter of reciprocating compressor to carry on the computation. On the
basis of obtained inertial force to estimate balancing mass. After that
Taguchi’s parameter design methods was adopted to carry out the control
factor analysis, on reciprocating compressor characteristic to optimize the
design parameter with the help of computer to speed up the product
development and performance improvement.
|
|---|