Electronic Printed Circuit Board PlantFire Prevention Engineering Research
碩士 === 元智大學 === 機械工程學系 === 93 === This thesis is to perform a fire safety analysis of a PCB manufacture factory premises which divided into many rooms by way of manufacture process on 6 floors（five floors are aboveground; the other one is the basement）. The zone model CFAST which developed by Buildi...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2005
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/95273266081622891716 |
| Summary: | 碩士 === 元智大學 === 機械工程學系 === 93 === This thesis is to perform a fire safety analysis of a PCB manufacture factory premises which divided into many rooms by way of manufacture process on 6 floors（five floors are aboveground; the other one is the basement）.
The zone model CFAST which developed by Building and Fire Research Laboratory of National Institute of Standards and Technology is used to construct a numerical simulation model to predict the upper layer temperature, layer height and CO concentration during postulated fires. A postulated fire was simulated at different rooms to see how different position of a fire can influence the fire condition.
After observed these cases studies that described above, then fire prevention and control can put into practice in the similar industrial manufacture factory premises.
|
|---|