Detection on Fluctuation of Fluorescent Lighting
碩士 === 國立中山大學 === 電機工程學系研究所 === 93 === Fluorescent lamps with ac current generate alternating lamp power and thus the light fluctuates at twice the operating frequency. To observe the light fluctuation from a fluorescent lamp, a light detector is built by using high sensitivity phototransistors in t...
Main Authors: | , |
---|---|
Other Authors: | |
Format: | Others |
Language: | en_US |
Published: |
2005
|
Online Access: | http://ndltd.ncl.edu.tw/handle/37314364815230864510 |
Summary: | 碩士 === 國立中山大學 === 電機工程學系研究所 === 93 === Fluorescent lamps with ac current generate alternating lamp power and thus the light fluctuates at twice the operating frequency. To observe the light fluctuation from a fluorescent lamp, a light detector is built by using high sensitivity phototransistors in this thesis. The test results show that the light output waveform is very similar to that of the lamp power. It is also found that the light output from the whole lamp tube is not identical because the light output fluctuation becomes significant when close to the end of the lamp. When the lamp comes to the life-end, its light output is different from those produced by lamps of good conditions.
In attempts to further discuss the features of light fluctuation, an electronic ballast with balanced multi-phase outputs is designed and built to reduce the variation in the light output. With a balanced multi-phase operation, the resultant light output from lamps’ multi-phase currents should be a constant. An experimental 3-phase electronic ballast circuit is built to test this theoretical prediction. Experimental tests confirm that the light fluctuation can be effectively reduced by operating lamps with balanced multi-phase currents.
|
---|