| Summary: | 碩士 === 國立臺北科技大學 === 機電整合研究所 === 92 === Measuring Technique always plays an important role in any industry. General measuring equipment usually extracts single physical quantity at different locations by a multi-axis motion platform and a specific probe. However, for measuring two physical quantities we may need two different measuring equipments that will increase the cost and area of equipment.
For solving this problem, we develop multi-functional measuring equipment called Measuring Center. This system includes two parts, the first part is common subsystem which aims to integrate different measurement devices between equipment. The common subsystem consists of multi-axis motion platform, motion control module, vision module, and software module. The second part is modular probe. User can choose suitable probe in terms of desired measuring purpose, such as ultrasonic probe and laser probe etc. We assemble desired probe on probe fixture and orientate the probe through digital image guiding device. Therefore the probe can align DUT ( Device Under Test ) to execute measuring procedure. In this way this novel measuring center can measure more than one parameter of the DUT.
This thesis integrates different measurement equipment in hardware field that can obviously decrease cost and area of equipment. After integrated in software field, it can provide user similar operating software environment. The software interface will be very friendly to lower training time of the new user.
|
|---|
