| Summary: | 碩士 === 中國文化大學 === 資訊傳播研究所 === 92 === This article is focusing mainly on the cardboards for Blister Packing, in the operational procedures, we coat fixed quantity of Heat Seal Glue to the cardboards currently under mass production of different lot number, such as 300P, 350P, 400P etc., that provided by 5 different paper companies, we use the National Paper Coating Quality Standard that published by Bureau of Standards, MOEA, to establish effective samples and do research and analysis by experimental methods. From base paper, printing, gluing and processing, we collect data on the gloss and peel strength from in this article could act as a bridge to help the industry to have a better understanding the effect of Heat Seal Glue on the Blister Packing paper card, and reach finally the goal of quality requirement in product packing among vision, transportation, trading, technology, and utilization.
The research results are summarized as follows:
1.Current research shows that although the equivalent products that provided by different manufacturers, they all reach the quality standard in utilization. For different brands, 300P, 350P, 400P, all the above three sources paper pound number, the gloss level and peel strength has no difference because of different paper pound number. But the gloss level and peel strength of different brands has its difference.
2.Current research has been focused on the relationship between reflection concentration and absorbing ability, and the obtained data all show an irrelevance between each other. Only the source paper surface gloss level has consistent effect, that is, the source paper surface gloss level produce difference on the peel strength in different degree for paper with or without printing.
3.The source paper surface gloss is highly negatively related to the peel strength of source paper without printing, there is difference for the
source paper surface gloss level among the three different paper pound number provided by five different, the production process details from
contractors are difficult to know, but the paper quality all reach the paper coating quality standard published by National Bureau of Standards. From the experiment we know that source paper with higher gloss level will have smaller peel strength, and vice versa, source paper with lower gloss level will have larger peel strength, source paper surface gloss is about 44%, and the optimum peel strength for paper without printing is 0.11 Kg/inch2.
4.The source paper surface gloss level and the peel strength for paper with printing is highly to moderately negatively relate, for general four colors (trapping, magenta, cyan, yellow, black) color block, the peel strength has difference produced by printing. Source paper surface gloss is about 44%, and the peel strength still reaches 0.10 Kg/inch2.
5.Special color (fluorescence, gold, silver ink) color block, because the fluorescence ink contains fluorescence inhibitor, and the gold and silver ink contains metal pigment, all these affect glue penetration and absorptive, so that the source paper gloss level difference from different brands have no effect on the peel strength. The peel strength all around 0.07~0.08 Kg/inch2.
|
|---|
