A New Surface Finish for Solder Joints Exhibiting both Low Consumption Rate and Oxidation Resistance
碩士 === 國立中央大學 === 化學工程與材料工程研究所 === 92 === Solder joints are the most friable links in microelectronic devices. In fact, a failure in solder joints is the easiest root which would take the responsibility for malfunction in electronic products. Therefore, to improve the reliability of solder joints is...
Main Authors: | Wan-Chun Chang, 張琬君 |
---|---|
Other Authors: | Cheng-Heng Kao |
Format: | Others |
Language: | zh-TW |
Published: |
2004
|
Online Access: | http://ndltd.ncl.edu.tw/handle/72841748967225681766 |
Similar Items
-
Reliability Analysis of Lead free CSP solder joint under different surface finishing
by: Chien-Lin Chang Chien, et al.
Published: (2005) -
The Choice of Surface Finishes for Solder Joint and the Interfacial Reactions by Solid-State Bonding
by: Chi-Pu Lin, et al.
Published: (2012) -
Electromigration study in eutectic SnPb solder joints with Ni under-bump-metallization and solder-on-pad surface finish
by: Wu, Tai-Lin, et al.
Published: (2009) -
Influence of IC substrate surface finish joints with Pb-free solder in reliability test
by: Lin, Yen-Yi, et al.
Published: (2009) -
Exploration of failure mechanisms in Sn-Ag-Cu solder joints under thermal cycling test by modulation of Ag content in solder and the selection of surface finish
by: Lee, Christine Jill, et al.
Published: (2016)