Supported Pt on multiple wall Carbon Nanotube for the electrode application of Direct Methanol Fuel Cell
碩士 === 國立中興大學 === 化學工程學系 === 92 === As for the CNT growth over nano-Mg-Ni alloys, the results of XRD, TGA,TEM that the optimum reaction condition nano-Mg-Ni alloy as the catalyst to perform pyrolysis of 100% CH4 to form CNTs with the flow rate about 100 ~ 120 sccm at 650℃. Raman results also indicat...
Main Authors: | yum-ming dai, 戴永銘 |
---|---|
Other Authors: | Jih-Mirn Jehng |
Format: | Others |
Language: | zh-TW |
Published: |
2004
|
Online Access: | http://ndltd.ncl.edu.tw/handle/40123902058981893625 |
Similar Items
-
Preparation multi-walled carbon nanotubes supported PtRu catalysts for Direct Methanol fuel cells anode by chemical reduction
by: 賴羿如
Published: (2006) -
Fabrication of Metallic Catalyst/Carbon Nanotube Composite Electrodes for Direct Methanol Fuel Cells
by: Jin-Long Wei, et al.
Published: (2009) -
Preparation of Pt Nanocatalyst onto Multi-walled Carbon Nanotubes for Fuel Cell Electrode Materials
by: Hong-ji Lin, et al. -
Deposition of hydrothermally synthesized Pt on different carbons for use as direct methanol fuel cell electrodes
by: Chieh-YunHuang, et al.
Published: (2011) - Formation of RuO₂.Xh₂O Supported Pt Anode Electrode for Direct Methanol Fuel Cells