Paramatric study of Screw Compressor
碩士 === 國立中正大學 === 機械系 === 92 === The experiment construct the test rig to measure the indicated diagram and rotor temperature inside the screw compressor The result shows that the test rig is well performed except the burst pressure pick is abnormally high, it can b...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2004
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/51323897079949624182 |
| Summary: | 碩士 === 國立中正大學 === 機械系 === 92 === The experiment construct the test rig to measure the indicated diagram and rotor temperature inside the screw compressor
The result shows that the test rig is well performed except
the burst pressure pick is abnormally high, it can be caused by the small volume existed in pressure sensor head or the burst pressure is the real phenomenon, this two conclusion need to be further proved by test other type of screw compressor and the temperature measured on the rotor can be offer to calculate the deformation of the rotor
|
|---|