Analysis of Contact at the Head/Tape Interface
碩士 === 元智大學 === 機械工程學系 === 91 === With the increase in the recording density of hard disk system, the demand in the data recording capacity of tape drive system is keeping increase. One of the advantages of the tape drive system is high volumetric recording density, which is obtained by h...
Main Authors: | , |
---|---|
Other Authors: | |
Format: | Others |
Language: | zh-TW |
Published: |
2003
|
Online Access: | http://ndltd.ncl.edu.tw/handle/72030224909559710864 |
id |
ndltd-TW-091YZU00489032 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-TW-091YZU004890322017-05-28T04:39:14Z http://ndltd.ncl.edu.tw/handle/72030224909559710864 Analysis of Contact at the Head/Tape Interface 磁頭/磁帶界面間之微觀磨潤分析 Cheng-Ying Yu 余承穎 碩士 元智大學 機械工程學系 91 With the increase in the recording density of hard disk system, the demand in the data recording capacity of tape drive system is keeping increase. One of the advantages of the tape drive system is high volumetric recording density, which is obtained by high area recording density and thin tape. The area recording density can be increased by introducing high performance tape, which superior magnetic characteristics and smooth magnetic surface. However, a smooth surface often produces a higher friction coefficient, which could cause tape damage by heads and unstable tape running in the tape drive. The one-dimensional (1D) steady-state compressible Reynolds equation and tape deformations equation is analyzed using the finite-difference method. Numerical results for the head/tape spacing, the air-bearing pressure and the contact pressure are obtained for linear head/tape interface and rotary head/tape interface. The empirical relation and elliptic elastic-plastic microcontact model were incorporated into an existing numerical simulation of the head/tape interface resulting in a model, where the tape can be partially supported by air-bearing pressure and partially supported by head/tape contact pressure. In this paper, the numerical simulation results for the head/tape spacing, the air-bearing pressure and the contact pressure are obtained and compared with other author’s results. The effect of parameters such as tape density, tape speed, tape tension and tape wrap angle on the head/tape spacing and pressure is investigated. Tze-Chi Hsu 徐澤志 2003 學位論文 ; thesis 95 zh-TW |
collection |
NDLTD |
language |
zh-TW |
format |
Others
|
sources |
NDLTD |
description |
碩士 === 元智大學 === 機械工程學系 === 91 === With the increase in the recording density of hard disk system, the demand in the data recording capacity of tape drive system is keeping increase. One of the advantages of the tape drive system is high volumetric recording density, which is obtained by high area recording density and thin tape. The area recording density can be increased by introducing high performance tape, which superior magnetic characteristics and smooth magnetic surface. However, a smooth surface often produces a higher friction coefficient, which could cause tape damage by heads and unstable tape running in the tape drive.
The one-dimensional (1D) steady-state compressible Reynolds equation and tape deformations equation is analyzed using the finite-difference method. Numerical results for the head/tape spacing, the air-bearing pressure and the contact pressure are obtained for linear head/tape interface and rotary head/tape interface. The empirical relation and elliptic elastic-plastic microcontact model were incorporated into an existing numerical simulation of the head/tape interface resulting in a model, where the tape can be partially supported by air-bearing pressure and partially supported by head/tape contact pressure.
In this paper, the numerical simulation results for the head/tape spacing, the air-bearing pressure and the contact pressure are obtained and compared with other author’s results. The effect of parameters such as tape density, tape speed, tape tension and tape wrap angle on the head/tape spacing and pressure is investigated.
|
author2 |
Tze-Chi Hsu |
author_facet |
Tze-Chi Hsu Cheng-Ying Yu 余承穎 |
author |
Cheng-Ying Yu 余承穎 |
spellingShingle |
Cheng-Ying Yu 余承穎 Analysis of Contact at the Head/Tape Interface |
author_sort |
Cheng-Ying Yu |
title |
Analysis of Contact at the Head/Tape Interface |
title_short |
Analysis of Contact at the Head/Tape Interface |
title_full |
Analysis of Contact at the Head/Tape Interface |
title_fullStr |
Analysis of Contact at the Head/Tape Interface |
title_full_unstemmed |
Analysis of Contact at the Head/Tape Interface |
title_sort |
analysis of contact at the head/tape interface |
publishDate |
2003 |
url |
http://ndltd.ncl.edu.tw/handle/72030224909559710864 |
work_keys_str_mv |
AT chengyingyu analysisofcontactattheheadtapeinterface AT yúchéngyǐng analysisofcontactattheheadtapeinterface AT chengyingyu cítóucídàijièmiànjiānzhīwēiguānmórùnfēnxī AT yúchéngyǐng cítóucídàijièmiànjiānzhīwēiguānmórùnfēnxī |
_version_ |
1718453913381765120 |