The Analysis of Crack in Low Pressuere Die Casting Mold of BeCu Alloy

• Main Authors: Ko, Jung-Hua, 柯榮華
• Other Authors: 蔡 顯 榮
• Format: Others
• Language: zh-TW
• Published: 2003
• Online Access: http://ndltd.ncl.edu.tw/handle/20769544021164826070

碩士 === 國立臺灣科技大學 === 機械工程系 === 91 === The main topics are discussing the analysis of Crack in Low Pressuere Die Casting mold of BeCu alloy. A series of experiments including mold temperature measure, thermal expansion coefficient, Chemical analyses using the OES, microhardness testing , optical metallography analysis were used to determine the Crack cause. Experimental data show that the Low Pressuere Die Casting mold of BeCu alloy. Due to brass casting high melting points of alloys use , mold gate under decrease quantity of Ni , material the thermal strength tends to decrease, to show thermal fatigue, the hardness tends to decrease, recrystallization and increase in grain size. This research has finished the initial study of the analysis of Crack in Low Pressuere Die Casting mold of BeCu alloy. The result can be the basics of the further research, and the application of the future.