龎百正

• Main Authors: Pang Bai Zheng, 龎百正
• Other Authors: 何應欽
• Format: Others
• Language: zh-TW
• Published: 2003
• Online Access: http://ndltd.ncl.edu.tw/handle/81384107742993071816

碩士 === 國立中央大學 === 工業管理研究所 === 91 === There is a very important issue that is the management of material movement between workstations in any manufacturing facility. One of the main material handing systems is Automated Guided Vehicle Systems (AGVS). Automated Guided Vehicle Systems (AGVS) is a material-handling system in which driverless, battery-powered vehicles are moved by means of an electronic or optical signal from a path which has been installed in the floor. To satisfy a high throughput rate in any manufacturing facility, increasing carrying capacity of an AGV is one of the solutions. This thesis focuses on the dispatching and picking up rules of multiple-load AGVs in the manufacturing system. In this thesis, simulation was used to construct the multiple-load AGVs system and then we could use statistical software to analyze the simulated outcomes and various performances. Finally, we can test and verify the methodology in this thesis.