The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics
碩士 === 國立中山大學 === 電機工程學系研究所 === 90 === Microwave dielectric resonators (DRs) are being widely used in microwave telecommunication devices owing to their excellent characteristics of suitable dielectric constant, good temperature stability, and low dielectric loss. In this study, the crystalline phas...
Main Authors: | , |
---|---|
Other Authors: | |
Format: | Others |
Language: | en_US |
Published: |
2002
|
Online Access: | http://ndltd.ncl.edu.tw/handle/79722306985586466023 |
id |
ndltd-TW-090NSYS5442042 |
---|---|
record_format |
oai_dc |
spelling |
ndltd-TW-090NSYS54420422015-10-13T10:28:59Z http://ndltd.ncl.edu.tw/handle/79722306985586466023 The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics 摻雜MCAS玻璃之Al2O3-TiO2微波陶瓷特性之研究 Shan-Li Chang 張善理 碩士 國立中山大學 電機工程學系研究所 90 Microwave dielectric resonators (DRs) are being widely used in microwave telecommunication devices owing to their excellent characteristics of suitable dielectric constant, good temperature stability, and low dielectric loss. In this study, the crystalline phase and the microwave dielectric properties of the (1-x)Al2O3 - xTiO2 (x=0.08, 0.12, 0.16) compositions with 2wt%, 4wt%, 6wt%, and 8wt% MgO-CaO-Al2O3-SiO2 (MCAS) glass addition have been investigated. By combining the material Al2O3 with negative temperature coefficient of the resonant frequency (τf = -55 ppm/℃) and the material TiO2 with positive τf value (τf = +450 ppm/℃), it is desired to produce the ceramics with τf ~0 ppm/℃. The MCAS is used as liquid-phase sintering aid to lower down the sintering temperature. In the MCAS-doped (1-x)Al2O3 - xTiO2 system, the Al2TiO5 phase starts to appear at about 1250℃, and then the crystalline intensity of Al2TiO5 phase increases with the increase of sintering temperatures and MCAS glass content, until the temperatures that TiO2 is consumed. As the sintering temperature increases, the maximum dielectric constants and Q×f values can be obtained at 1250℃, and the τf values shift from positive to negative. The optimum τf value of —0.6 ppm/℃ exists in the 88mol%Al2O3 - 12mol%TiO2 composition with 2wt% MCAS addition and sintering temperature of 1300℃. The MCAS content, TiO2 content, and sintering temperature will result in the variation of microwave dielectric properties. In this study, MCAS-doped (1-x)Al2O3 - xTiO2 system exhibits the microwave dielectric properties of: εr=7~9.5, Q×f=6500~11000, and τf = -60 to +40ppm/℃. By adjusting the MCAS content, TiO2 content, and sintering temperatures, ceramics with good microwave properties can be obtained in the MCAS-doped (1-x)Al2O3 - xTiO2 system. Ying-Chung Chen Cheng-Fu Yang 陳英忠 楊證富 2002 學位論文 ; thesis 72 en_US |
collection |
NDLTD |
language |
en_US |
format |
Others
|
sources |
NDLTD |
description |
碩士 === 國立中山大學 === 電機工程學系研究所 === 90 === Microwave dielectric resonators (DRs) are being widely used in microwave telecommunication devices owing to their excellent characteristics of suitable dielectric constant, good temperature stability, and low dielectric loss. In this study, the crystalline phase and the microwave dielectric properties of the (1-x)Al2O3 - xTiO2 (x=0.08, 0.12, 0.16) compositions with 2wt%, 4wt%, 6wt%, and 8wt% MgO-CaO-Al2O3-SiO2 (MCAS) glass addition have been investigated. By combining the material Al2O3 with negative temperature coefficient of the resonant frequency (τf = -55 ppm/℃) and the material TiO2 with positive τf value (τf = +450 ppm/℃), it is desired to produce the ceramics with τf ~0 ppm/℃. The MCAS is used as liquid-phase sintering aid to lower down the sintering temperature.
In the MCAS-doped (1-x)Al2O3 - xTiO2 system, the Al2TiO5 phase starts to appear at about 1250℃, and then the crystalline intensity of Al2TiO5 phase increases with the increase of sintering temperatures and MCAS glass content, until the temperatures that TiO2 is consumed. As the sintering temperature increases, the maximum dielectric constants and Q×f values can be obtained at 1250℃, and the τf values shift from positive to negative. The optimum τf value of —0.6 ppm/℃ exists in the 88mol%Al2O3 - 12mol%TiO2 composition with 2wt% MCAS addition and sintering temperature of 1300℃. The MCAS content, TiO2 content, and sintering temperature will result in the variation of microwave dielectric properties. In this study, MCAS-doped (1-x)Al2O3 - xTiO2 system exhibits the microwave dielectric properties of: εr=7~9.5, Q×f=6500~11000, and τf = -60 to +40ppm/℃. By adjusting the MCAS content, TiO2 content, and sintering temperatures, ceramics with good microwave properties can be obtained in the MCAS-doped (1-x)Al2O3 - xTiO2 system.
|
author2 |
Ying-Chung Chen |
author_facet |
Ying-Chung Chen Shan-Li Chang 張善理 |
author |
Shan-Li Chang 張善理 |
spellingShingle |
Shan-Li Chang 張善理 The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics |
author_sort |
Shan-Li Chang |
title |
The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics |
title_short |
The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics |
title_full |
The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics |
title_fullStr |
The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics |
title_full_unstemmed |
The Study of MCAS Glass-doped Al2O3-TiO2 Microwave Ceramics |
title_sort |
study of mcas glass-doped al2o3-tio2 microwave ceramics |
publishDate |
2002 |
url |
http://ndltd.ncl.edu.tw/handle/79722306985586466023 |
work_keys_str_mv |
AT shanlichang thestudyofmcasglassdopedal2o3tio2microwaveceramics AT zhāngshànlǐ thestudyofmcasglassdopedal2o3tio2microwaveceramics AT shanlichang cànzámcasbōlízhīal2o3tio2wēibōtáocítèxìngzhīyánjiū AT zhāngshànlǐ cànzámcasbōlízhīal2o3tio2wēibōtáocítèxìngzhīyánjiū AT shanlichang studyofmcasglassdopedal2o3tio2microwaveceramics AT zhāngshànlǐ studyofmcasglassdopedal2o3tio2microwaveceramics |
_version_ |
1716828560984899584 |