Design and Implementation of Pressure and Flow Control Amplifier
碩士 === 逢甲大學 === 電機工程所 === 90 === Abstract Plastic products have been widely applied to the fields of industry and humam day-to-day life. With the increasing of demand for plastic quantity; high quality molded products are required, including surface and internal quality. Thus, the injection phase, f...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
2002
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/65sn3z |
| Summary: | 碩士 === 逢甲大學 === 電機工程所 === 90 === Abstract
Plastic products have been widely applied to the fields of industry and humam day-to-day life. With the increasing of demand for plastic quantity; high quality molded products are required, including surface and internal quality. Thus, the injection phase, filling phase, compressing phase and holding phase of plastics injection molding process should be precisely controlled.
In order to obtain the friendly and precisely controlled for phastic injection molding process, this thesis present a digital pressure/flow power amplifier based on a microcontroller. The digital pressure/flow power amplifier provide the pressure and flow servo control system. The PI control algorithm is used in the designed amplifier and implemented by software. The displacement of servo control system is driven by PWM technique which is directly controlled by the input setting voltage. Finally, a microcontroller-based digital pressure/flow controlled board is designed and implemented. Experimental results are also be demonstrated and discussed.
|
|---|