Research of Friction Saw Burr Forming Process

• Main Authors: Rew-Tsong Jang, 張仁聰
• Other Authors: Ray-Quen Hsu
• Format: Others
• Language: zh-TW
• Published: 2001
• Online Access: http://ndltd.ncl.edu.tw/handle/82267045072670974249

碩士 === 國立交通大學 === 機械工程系 === 89 === Friction sawing is one of the sawing process that uses a very high speed rotating round blade to cut the workpiece. During the sawing process, melting of the workpiece occurred because of the severe friction between the cutting blade and the workpiece. Friction sawing though can cut the workpiece off very fast, however, very often a large piece of burr will leave on the cut off face and need further machining to clear it . In the study, we will investigate the effects of blade line speed and sawing temperature on cut off surface of workpiece. And we can from the high speed photograph of the process,match up the photomicrograph of the cut off face, define the burr forming process of the friction sawing. It is found that the friction saw cutting process transform the cutting type into melting type , the cut-off materials not only form the chips to bring the cutting heats, but also adhesion on cutting face and then let the cutting forceincrease make the blade line speed drop. And the percentage of melted down is increasing in the sawing process, making the burr adhesion on the bottom of the cut off face.