Mold flow simulation is analysis by taguchi method

Mold flow simulation is analysis by taguchi method

碩士 === 國立成功大學 === 機械工程學系 === 88 ===

Bibliographic Details
Main Author:	林明正
Other Authors:	吳俊煌
Format:	Others
Language:	zh-TW
Published:	2000
Online Access:	http://ndltd.ncl.edu.tw/handle/66288618601167255014

Similar Items

The Taguchi Analysis of Mold flow Simulation of Electron Packaging
by: I-Cheng Chen, et al.
Published: (2007)

The Taguchi Analysis of Mold Flow Simulation of IC Packaging
by: Lee Hung-Lung, et al.
Published: (1999)

Improvement of Molding Warpage of a Sewing Machine Upper Cover with Mold Flow Analysis and Taguchi Method
by: GAO, SHENG-SIANG, et al.
Published: (2018)

Study on Warpage of Injection Molding Parameters of Toothbrush by Using Mouth Flow Analysis by Taguchi Method
by: Lai,Yu-Yu, et al.
Published: (2019)

Taguchi Method on the Light Guide Plate Molding
by: Chen-Tung Wu, et al.
Published: (2014)

Optimization and Simulation for Gas-Assisted Injection Molding with Counter Pressure by the Taguchi Method
by: Chien-Chou Wu, et al.
Published: (2017)

Application of CAE Analysis for Process in Injection Molding by Taguchi Method
by: Jiun-hung Liou, et al.
Published: (2016)

Application of Taguchi Methods for The Injection Molding Process And Screw Design
by: Lin, Tzer-Long, et al.
Published: (1997)

The Optimization of Mold Steel Milling Parameter Using the Taguchi Method
by: Yao-Shuang Lin, et al.
Published: (2009)

Improving the Deformation Warping European Regulatory Battery Holder by Using Mold Flow Analysis and Taguchi Method
by: Yang,Chun-Mei, et al.
Published: (2016)

Optimization of Molding Process in IC Assemblyusing the Taguchi method
by: Hua-Ming Huang, et al.
Published: (2009)

The Application of Taguchi Method on the Performance Optimiztion of Rotational Molding
by: Lai, chen chih, et al.
Published: (1997)

Structuring and Analysis of the Injection Molding Process for the Neural Network- using the Taguchi Method
by: Li Yeung-Chang, et al.
Published: (2002)

Using Taguchi Methods to Optimize Molding Parameters of Medical Clip
by: Ming-Han Yang, et al.
Published: (2011)

Integration of CAE and Taguchi Method on the Light Guide Plate Molding
by: Yen, Fong-Yi, et al.
Published: (2012)

The Research of Warpage for Gas-assisted Injection Molding by Taguchi Method
by: Yi-Cheng Tsai, et al.
Published: (2010)

The Warpage Optimization in Plastic Injection Molding Using Taguchi Method
by: Tran-Duc, Huy, et al.
Published: (100)

Application of Taguchi method in the light-emitting diode leadframeInjection molding parameters
by: Jung-chiuan Lin, et al.
Published: (2012)

Study of Taguchi Method and Properties using Simulation Moldflow Blu-Ray DVD Lens Injection Molding
by: Nai-jen Hsiao, et al.
Published: (2012)

Optimization of injection molding parameters using Taguchi method and response surface method
by: Chi-PO-Chun, et al.
Published: (2013)

An optimization of the plastic injection molding parameters for safety optical glasses by using Taguchi methods
by: Lim Leon Nardy, et al.
Published: (2010)

Study on the Influence of Thermal Effect on Mold Displacement by Applying Taguchi Method
by: CHEN, TAI-JUN, et al.
Published: (2019)

A study of sus316 spherical mold machining with Taguchi Method
by: Nais-Hiuan Wang, et al.
Published: (2013)

Investigation on Injection Compression Molding Process Parameters of Warpage by Taguchi Method
by: Chen Chien-Peng, et al.
Published: (2014)

Using Taguchi Method to Study the Movement of Vapor in the Green Sand Mold
by: J. J. Horng, et al.
Published: (1994)

Optimization of the injection molding process of Joystick product by using Taguchi method
by: Hoang, Anh Tai, et al.
Published: (2007)

Mold Design and Manufacturing Process Analysis for spline gears of Automobile shaft using Taguchi Method
by: Teng-Hui Chung, et al.
Published: (2013)

Application of Taguchi Method on Optimal Injection Molding Condition Determination of ASA Parts
by: Lee Chun-Yi, et al.
Published: (2017)

Optimal Parameter Setting for Bicycle Crank Hollow Molding Process by Taguchi Method
by: Chia-yi Lin, et al.
Published: (2009)

The Research of Warpage for Gas-assisted Injection Molding Parameter by Taguchi Experiment Method
by: Ting-Hau Hsu, et al.
Published: (2012)

The Rotating-Molded Thermoplastic Foaming Process Optimization Design by Using Taguchi Methods
by: LI-FAN CHUANG, et al.
Published: (2008)

Study of Injection Molding Warpage Using Analytic Hierarchy Process and Taguchi Method
by: Dyi-Cheng Chen, et al.
Published: (2016-10-01)

Optimization of Plastic Injection Molding Parameters for ABS Button using Taguchi Method
by: NGUYEN, VU-THANH, et al.
Published: (2015)

Analyze the optimum parameters of minimum warpage of injection molding mobile phone back cover by Taguchi method
by: Ping-Cheng Lin, et al.
Published: (2010)

Experimental and Numerical Analysis on Quality Optimization of Plastic Injection of a Multi-Cavity Mold with Taguchi Method
by: Liang-ZhengHuang, et al.
Published: (2016)

Study on the warpage of Socket terminal 2+2 Family Mold by Applying Taguchi Methods
by: Jia-He Han, et al.

A Study on the Application of Genetic Algorithm and Taguchi Methods for Mold Production Scheduling System
by: Tsung-Yi Wu, et al.
Published: (2002)

Study on Optimization Processing of Injection Molding on Light Guide Plate Applying Taguchi Method
by: Shao Wei Chien, et al.
Published: (2007)

A Study of Plastic Injection Molding Optimization Process Using Taguchi Method and PCA
by: Wu Sheng Huang, et al.
Published: (2007)

An Integration of Taguchi Method, Artificial Neural Network and Simulated Annealing on the Design of Process Parameters Optimal for MIMO Plastic Injection Molding
by: Li-En Jhu, et al.
Published: (2009)