A Comparision of Aluminum Alloy A356 Guideway Friction between Epoxy Resin-Moglice and PTFE-RULON J
碩士 === 國立臺灣大學 === 機械工程學系研究所 === 86 === Two kinds of polymer with low friction coefficient, epoxy resin Moglice and PTFE-RULON J, were used in this study as guideway material of small-sized alum inum prototype milling machine. The friction force betwee...
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Others |
| Language: | zh-TW |
| Published: |
1998
|
| Online Access: | http://ndltd.ncl.edu.tw/handle/42744605323203400398 |
| Summary: | 碩士 === 國立臺灣大學 === 機械工程學系研究所 === 86 === Two kinds of polymer with low friction coefficient, epoxy resin Moglice and
PTFE-RULON J, were used in this study as guideway material of small-sized alum
inum prototype milling machine. The friction force between guideways was meas
ured by the inclined platform and torque measurement device.A comparison betwe
en these two kinds of material was made and discussed. This study was provide
d as a reference for designing the guideway of aluminum milling machine.
|
|---|