| Summary: | 碩士 === 國立成功大學 === 機械工程學系 === 86 === Hydrostatic bearings are most important in manufacturing of
heavy machine. In general, the push powers of turbo compressor,
twyer and water marine engine are loaded by hydrostatic thrust
bearings. Rolling bearings and hydrostatic bearings are usually
used to support the center axial and the rotation flange.
Additionally, in machine tool, especial in large planing
machine, hydrostatic bearings are also applied for lubrication
and support. Although the hydrostatic bearing is
frictionless, and can minimize the wear of frictional momentum
and frictional power at lower rolling speed. However, the heavy
load of bearing will cause the relative displacement of the
bearing with respect to the center of support; when the
displacement of the bearing becomes large, the film thickness of
the bearing will be different from others. This situation can
result in non-uniform load of bearings, which will yield acute
damage. To avoid rising grave effect of machines, MSC/ARIES is
used to analyze the normal stress of bearings, and MARC is used
to analyze the contact problems of bearings.
|
|---|
