| Summary: | 碩士 === 國立台灣工業技術學院 === 工程技術研究所 === 85 === The main purpose of this study is to develop an object-
oriented workshopcontrolling and monitoring system. In a CIM
factory, the workshop controllerpasses the manufacturing command
from the upper level to the lower level.It also collects the
manufacturing status from the lower level and passes back to the
upper level. The main function of a workshop controller is the
integration of the manufacturing command and status between the
lower andthe upper level. This study uses UML to model the
manufacturing system,using the set of notations such as use case
diagram, class diagram, sequencediagram, collaboration diagram
and state diagram to describe the workshopcontroller system.
Besides, this study takes the process of assembling piston and
rodin the CIM factory of National Taiwan Institute of Technology
as an exampleto simulate the material flow and the manufacturing
process. In the study a workshop controlling and monitoring
system which uses Java as a developinglanguage was implemented
and evaluated by above process. The user in or even outside the
workshop will easily access the manufacturing information
throughany WWW browser on the Internet. Once the UI has updated
in the server sidethrough the WWW, all the client side user on
the Web will get the same UIversion without any change on client
side.
|
|---|
