Effects of Polyethylene on the Morphologye, Barrier and Impact Properties of Polyethylene/Modified Polyamide Blends

Effects of Polyethylene on the Morphologye, Barrier and Impact Properties of Polyethylene/Modified Polyamide Blends

碩士 === 國立臺灣科技大學 === 纖維及高分子工程技術研究所 === 85 === An investigation of the influence of the melt shear viscosities of polyethylenes (PE) on the morphology, barrier and impact properties of polyethylene/modified polyamide PE/MPA bottles is reported. The melt shear viscosities of polyethylenes exhibit...

Full description

Bibliographic Details
Main Author:	簡朝發
Other Authors:	葉正濤
Format:	Others
Language:	zh-TW
Published:	1997
Online Access:	http://ndltd.ncl.edu.tw/handle/46697439104610273532

Similar Items

Effects of compositions of modified polyamides on the barrier and impact properties of polyethylene/modified polyamide blends
by: 范姜建成
Published: (1997)

Blending and barrier properties of the Polyethylene/Blends of Modified Polyamide and Ethylene Vinyl Alcohol Copolymer and Polyethylene/Blends of modified Polyamide and polyamide 6 Clay nanocomposite
by: Wei-Hua Yao, et al.
Published: (2004)

Effects of Composition of the Modified Polyamide upon the Barrrrrier Properties of Polyethylene/Modified Polyamide Blends
by: Yang, Shun-Xu, et al.
Published: (1996)

Effect of Compatibilizer Precursors on the Barrier Properties and Morphology of Polyethylene/ Polyamide Blends
by: 卓美芳
Published: (1995)

Paint mixed solvent permeation resistance of the polyethylene, polyethylene/modified polyamide, and polyethylene/blends of modified polyamide and ethylene vinyl alcohol bottles
by: Huey-Lan Chang, et al.
Published: (2002)

Influence of Compositions of Modified Blends of Polyamide/Polyvinyl Alcohol on the Methanol/Gasoline Fuel Barrier Properties of the Blends of Polyethylene/Modified Blends of Polyamide/Polyvinyl Alcohol
by: Wang Li-Hung, et al.
Published: (2000)

Optimum Preparation of Barrier Containers of Polyethylene/Modified Polyamide/Modified Polyvinyl Alcohol Blends
by: Su Yu-sheng, et al.
Published: (1998)

Paint solvent permeation resistance of the polyethylene, polyethylene/polyamide and polyethylene/modified polyamide bottles
by: WEI-HSIANG SHIH, et al.
Published: (2001)

Paint mixed solvent permeation resistance of polyethylene/modififed polyamide, and polyethylene/blends of modified polyamide and nylon clay bottles
by: 葉綮翊
Published: (2003)

Gasoline Permeation Resistance of the As-blow-molded and Annealed Polyethylene, Polyethylene/Polyamide and Polyethylene/Modified Polyamide Bottles
by: Chin-Her Chen, et al.
Published: (2000)

Investigation of the Polyethylene, Polyethylene/modified polyamide, and Polyethylene/Blends of Modified Polyamideand Ethylene Vinyl Alcohol Copolymers Bottles against Permeation of Solvents
by: Shih-Hsuan Huang, et al.
Published: (2004)

Gasoline Permeation resistance of polypropylene/modified polyamide, polyethylene/blends of modified polyamide and nylon clay, and polypropylene/blends of modified polyamide and ethylene vinyl alcohol bottles
by: 戎家宏
Published: (2004)

Investigation of the Optimum Processing Condition of Blow-molded Blends of Polyethylene / Modified Polyamide
by: Chao Chien-Chung, et al.
Published: (1998)

A study of the gasoline permeation resistance of laminar polyethylene/modified polyamide blends.
by: WEN-SHENG WANG, et al.
Published: (1999)

Compatibilization Behaviors of High Density Polyethylene and Polyamide Blends
by: Hung Hsu, et al.
Published: (1999)

Gasoline Permeation Resistance of the Blends of Polyethylene/Modified Blends of Polyamide and Ethylene Vinyl Alcohol Copolymer
by: Kwun-jen Shih, et al.
Published: (2001)

Biofuels Barrier Properties of Polyamide 6 and High Density Polyethylene
by: Fillot L.-A., et al.
Published: (2015-02-01)

Oxygen and water vapor permeabilities of polyethylene polyamide blends
by: Jinnah, Ishtiaq Ali.
Published: (1983)

Processing – morphology – property relationships of polyamide 6/polyethylene blend–clay nanocomposites
by: R. Scaffaro, et al.
Published: (2013-10-01)

Paint mixed solvent barrier properties of blow-molded bottles of polyethylene/blends of modified polyamide and ethylene vinyl alcohol with varying vinyl alcohol contents
by: 楊名鎬
Published: (2003)

Investigation of Oxygen Permeation Resistance of the Blow-molded Bottles of Polyethylene / Modified Ethylene Vinyl Alcohol Copolymer and Polyethylene / Blends of Modified Polyamide and Ethylene Vinyl Alcohol Copolymer
by: Hung - Tse Yao, et al.
Published: (2002)

Morphology development and rheological properties of reactively compatibilized Polyamide 6 / High Density Polyethylene blends
by: Épinat, Chloé
Published: (2014)

Thermal conductivity of plasma modified polyethylene terephthalate and polyamide-6 layers
by: G. Kalacska, et al.
Published: (2016-05-01)

Reinforcement of the Gas Barrier Properties of Polyethylene and Polyamide Through the Nanocomposite Approach: Key Factors and Limitations
by: Picard E., et al.
Published: (2015-02-01)

Low-Density Polyethylene/Polyamide/Clay Blend Nanocomposites: Effect of Morphology of Clay on Their Photooxidation Resistance
by: N. Tz. Dintcheva, et al.
Published: (2017-01-01)

Control and stabilization of morphologies in reactively compatibilized Polyamide 6 / High Density Polyethylene blends
by: Argoud, Alexandra
Published: (2011)

Control and stabilization of morphologies in reactively compatibilized Polyamide 6 / High Density Polyethylene blends
by: Argoud, Alexandra
Published: (2011)

Rheological and mechanical properties of ultrahigh molecular weight polyethylene/high density polyethylene/polyethylene glycol blends
by: Yingchun Li, et al.
Published: (2019-01-01)

Physical property enhancement of polyethylene blends
by: Zhang, Ai Yang
Published: (1999)

Morphology and electrical properties of polyethylene blends
by: Hosier, Ian L.
Published: (1996)

Polyethylene/Polyamide Blends Made of Waste with Compatibilizer: Processing, Morphology, Rheological and Thermo-Mechanical Behavior
by: Dorota Czarnecka-Komorowska, et al.
Published: (2021-07-01)

The effect of polyethylene-octene elastomer on the morphological and mechanical properties of polyamide 6/ polypropylene nanocomposites
by: Wahit, Mat Uzir, et al.
Published: (2005)

Investigation of the oxygen barrier properties of blown films of modified polyamide/nylon clay and modified polyamide/ethylene vinyl alcohol blends
by: CHIANG TING YUAN, et al.
Published: (2004)

Enhanced mechanical properties of a novel compatibilized recycled polyethylene terephthalate/polyamide 11 (rPET/PA11) blends
by: Z. I. Khan, et al.
Published: (2021-12-01)

The Effect of Photo-Initiated Oxidation on Mechanical Properties of High Density Polyethylene / Linear Low Density Polyethylene Blends
by: Najat J. Saleh, et al.
Published: (2007-12-01)

CURING AND MECHANICAL PROPERTIES OF CHLOROSULPHONATED POLYETHYLENE RUBBER BLEND
by: Jaroslava Budinski-Simendić, et al.
Published: (2011-09-01)

The rheological and structural properties of blends of polyethylene with paraffin wax
by: Winters, Ian Douglas
Published: (2013)

The thermal and mechanical properties of polypropolene metallocene polyethylenes and their blends
by: Razavi Nouri, Mohammed
Published: (2002)

Breakdown properties of high density polyethylene and polypropylene blends
by: Amir Hamzah, Norhailiza
Published: (2018)

Effects of the Compatibilizer on the Characteristic Properties of High-Density Polyethylene/ Polyamide 6/ Graphene Nanosheets Composites
by: YE,JI-YUAN, et al.
Published: (2019)