The Effect of Pressure Gradient on the Flat-Plate Side Heat Transfer in Ducts

碩士 === 國立臺灣大學 === 機械工程學系 === 85 === The purpose of present study is to investigate the effect of pressure gradient on the convective heat transfer in fully- developed turbulent duct flow. A transient liquid crystal thermochromy is employed...

Full description

Bibliographic Details
Main Authors: Hsu, Kun-Ming, 許坤銘
Other Authors: Chen Pin-Hei
Format: Others
Language:zh-TW
Published: 1997
Online Access:http://ndltd.ncl.edu.tw/handle/66657622511649105932
Description
Summary:碩士 === 國立臺灣大學 === 機械工程學系 === 85 === The purpose of present study is to investigate the effect of pressure gradient on the convective heat transfer in fully- developed turbulent duct flow. A transient liquid crystal thermochromy is employed to measure local heat transfer coefficients over the flat plate. In the test wind tunnel, the main stream velocity can be adjusted from 3m/s to 20 m/s, corresponding to the Reynolds number range from 3200 to 37700. On the opposite side of the test flat plate, the pressure gradient of the main stream can be varied by placing three different shapes of duct wall ,namely a flat wall, a convex wall, and a concave wall. Separation can occur on either convex or concave wall for creating the pressure gradient. Measured results show that a strong pressure gradient results a great heat transfer variation on the flat plate. Before the separation on convex wall.