Development of a Colored Tetragonal Zirconia Polycrystals Powder- Binder Blend

Development of a Colored Tetragonal Zirconia Polycrystals Powder- Binder Blend

博士 === 國立臺灣科技大學 === 機械工程研究所 === 84 ===

Bibliographic Details
Main Authors:	Qiu, Yue-Hong, 邱耀弘
Other Authors:	Lin, Shun-Tian
Format:	Others
Language:	zh-TW
Published:	1996
Online Access:	http://ndltd.ncl.edu.tw/handle/75455043034873967602

Similar Items

Tetragonal Zirconia polycrystals Subjected to Cyclic Tension-Compression Loading
by: Jo-mi Youn, et al.
Published: (2005)

CHARACTERIZATION OF THE MECHANICAL PROPERTIES OF YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS
by: JOSE EDUARDO VASCONCELLOS AMARANTE
Published: (2017)

The Inelastic Deformation of Tetragonal Zirconia Polycrystals Subjected to High Compressive Stress
by: Wen-chu Liao, et al.
Published: (2007)

Low temperature degradation of yttria stabilised tetragonal zirconia polycrystals (TZP's)
by: Burke, Darren
Published: (1998)

[en] CHARACTERIZATION OF THE MECHANICAL PROPERTIES OF YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS
by: JOSE EDUARDO VASCONCELLOS AMARANTE
Published: (2019)

Zircônia tetragonal policristalina. Parte II: Microestrutura e resistividade elétrica Tetragonal zirconia polycrystals. Part II: Microstructure and electrical resistivity
by: S. K. Tadokoro, et al.
Published: (2001-06-01)

Study of the Fracture Behavior of Tetragonal Zirconia Polycrystal with a Modified Phase Field Model
by: Jingming Zhu, et al.
Published: (2020-10-01)

Effect of Yttria Content on the Translucency and Masking Ability of Yttria-Stabilized Tetragonal Zirconia Polycrystal
by: Young-Eun Cho, et al.
Published: (2020-10-01)

Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystal: Effects of different aging regimens
by: Luís Felipe GUILARDI, et al.
Published: (2017-12-01)

An investigation into the interface development in solid state reaction bonded platinum/yttria - stabilised tetragonal zirconia polycrystal composites
by: Pharaoh, Mark Wilson
Published: (1989)

Translucent zirconia polycrystals prepared from nanometric powders
by: Radosław Lach, et al.
Published: (2015-09-01)

Influence of milling systems and marginal configurations on the fit of yttrium stabilized tetragonal zirconia polycrystals (Y-TZP)’ copings
by: Khulud A Al-Aali, et al.
Published: (2020-12-01)

The sintering, mechanical and ageing properties of transition metal oxide-doped yttria-tetragonal zirconia polycrystals (Y-TZP)
by: Lawson, Simon
Published: (1993)

On the dynamic compared to static grain growth rate in 3 mole% yttria-stabilized tetragonal zirconia polycrystals (3 Y-TZP)
by: Hans Conrad, et al.
Published: (2016-08-01)

Comparison of optical and crystal properties of three translucent yttria-stabilized tetragonal zirconia polycrystals with those of lithium disilicate glass-ceramic material
by: Chun-Cheng Wang, et al.
Published: (2021-10-01)

The inelastic Response of Tetragonal Zirconia
by: 郭國興
Published: (2002)

The effect of in vitro aging on the color stability of cubic and tetragonal zirconia materials
by: Maha S Mezied, et al.
Published: (2020-01-01)

Influence of elongated zirconia particles on microstructure and mechanical properties of yttria stabilized zirconia polycrystals
by: Kamil Wojteczko, et al.
Published: (2019-03-01)

INFLUENCE OF MANGANESE ON THE SINTERING PROPERTIES OF TETRAGONAL ZIRCONIA
by: S. RAMESH, et al.
Published: (2013-03-01)

Effect of Alumina Dopant on Transparency of Tetragonal Zirconia
by: Haibin Zhang, et al.
Published: (2012-01-01)

Lattice and grain boundary diffusion of cations in tetragonal zirconia
by: Swaroop, Sathya, et al.
Published: (2016)

Investigation on the irradiation-induced the monoclinic to tetragonal phase transformation of zirconia
by: Yu-Hsiang Shen, et al.
Published: (2013)

Zircônia tetragonal policristalina. Parte I: síntese e caracterização
by: Tadokoro S. K., et al.
Published: (2000-01-01)

Tetragonal BiFeO3 on yttria-stabilized zirconia
by: Heng-Jui Liu, et al.
Published: (2015-11-01)

Phase field modeling of tetragonal to monoclinic phase transformation in zirconia
by: Mamivand, Mahmood
Published: (2014)

Effects of gaseous-carbon assistant on the crystalline size enhancement of tetragonal zirconia
by: Wu, Bing-Han, et al.
Published: (2018)

MONOCLINIC - TETRAGONAL ZIRCONIA QUANTIFICATION OF COMMERCIAL NANOPOWDER MIXTURES BY XRD AND DTA
by: M. R. Gauna, et al.
Published: (2015-12-01)

A NOVEL METHOD FOR SYNTHESIS OF METASTABLE TETRAGONAL ZIRCONIA NANOPOWDERS AT LOW TEMPERATURES
by: F. KAZEMI, et al.
Published: (2011-03-01)

Size study of room-temperature tetragonal zirconia stabilisation under nano-confinement
by: Shin-Chi Yang, et al.
Published: (2012)

Cyclic martensitic transformations and damage evolution in shape memory zirconia: Single crystals vs polycrystals
by: Crystal, Isabel R., et al.
Published: (2022)

Cyclic martensitic transformations and damage evolution in shape memory zirconia: Single crystals vs polycrystals
by: Crystal, Isabel R., et al.
Published: (2022)

Relation between mechanical and textural properties of dense materials of tetragonal and cubic zirconia
by: Gómez Sofía, et al.
Published: (2016-01-01)

Moldability of nano size zirconia for powder injection molding process by using PEG and PMMA binders
by: Al Basir, et al.
Published: (2020)

Fracture toughness enhancement of yttria-stabilized tetragonal zirconia polycrystalline ceramics through magnesia-partially stabilized zirconia addition
by: Bilal Soylemez, et al.
Published: (2020-12-01)

Grain size stabilization of tetragonal phase of zirconia in sputtered Zr- O cermet films
by: M. S. Hadavi, et al.
Published: (2005-06-01)

Low-Temperature Degradation (LTD) Behaviour of CuO-Doped Tetragonal Zirconia Ceramic
by: S. Ramesh, et al.
Published: (2012-03-01)

Initial Bacterial Adhesion on Different Yttria-Stabilized Tetragonal Zirconia Implant Surfaces in Vitro
by: Lamprini Karygianni, et al.
Published: (2013-12-01)

Zircônia tetragonal estabilizada por ítria: comportamento mecânico, adesão e longevidade clínica
by: Y. D. Belo, et al.
Published: (2013-12-01)

Influence of core design, production technique, and material selection on fracture behavior of yttria-stabilized tetragonal zirconia polycrystal fixed dental prostheses produced using different multilayer techniques: split-file, over-pressing, and manually built-up veneers
by: Mahmood DJH, et al.
Published: (2016-02-01)

The Effect of a Small Amount SiO2 on Sintering Kinetics of Tetragonal Zirconia Nanopowders
by: Marharyta Lakusta, et al.
Published: (2017-06-01)

Cannot write session to /tmp/vufind_sessions/sess_9thkg964m1rm9ftunjjpes27sk