The influence of alloy (Sr,Ti) and temperature on wettability of liquid aluminum melt on alumina

The influence of alloy (Sr,Ti) and temperature on wettability of liquid aluminum melt on alumina

Show other versions (1)

碩士 === 國立清華大學 === 材料科學(工程)研究所 === 83 ===

Bibliographic Details
Main Authors:	Tzy-Shyan Wu, 吳滋賢
Other Authors:	Shinn-Tyan Wu
Format:	Others
Language:	zh-TW
Online Access:	http://ndltd.ncl.edu.tw/handle/60289336031809467858

Similar Items

The Wettability of Liquid Aluminum Melt on α-Alumina
by: Wang, Duan Jen, et al.
Published: (1995)

The influences of temperature and atmosphere on the wettability of aluminum melt on sapphire, polycrystalline aluminum nitride and titanium nitride thin film
by: 何獻南
Published: (1998)

Aluminum Melt Filtration with Carbon Bonded Alumina Filters
by: Claudia Voigt, et al.
Published: (2020-09-01)

Wettability and Constituting phases of Cu-Sn-Ti Alloys
by: jia-feng LI, et al.
Published: (2007)

Study on the Distribution Uniformity and Two-Phase Wettability of Fly Ash Particles in the Aluminum-Base Melt
by: Shao-Jun Gu, et al.
Published: (2011)

THE INFLUENCE OF TEMPERATURE ON THE ALUMINUM ALLOYS
by: Andrei DIMITRESCU, et al.
Published: (2013-05-01)

The effect of oxygen vacancies on water wettability of transition metal based SrTiO
by: Sarkar, Tarapada, et al.
Published: (2017)

Preparation and morphology-dependent wettability of porous alumina membranes
by: Dmitry L. Shimanovich, et al.
Published: (2018-05-01)

Electrorefining of aluminum alloy in ionic liquids at low temperatures
by: Kamavaram V., et al.
Published: (2003-01-01)

Selective Laser Melting of Aluminum and Its Alloys
by: Zhi Wang, et al.
Published: (2020-10-01)

Wettability of Surface on Aluminum Alloy Based on Laser Micro-textured and Self-assembled Technique
by: LI Jie, et al.
Published: (2018-01-01)

The Influence of Sr Addition on the Microstructure and Mechanical Properties of Aluminum Die-casting Alloys
by: Sun Xiaodong, et al.
Published: (2016-01-01)

Effect of Trace Addition of Sr and Be to the Microshrinkage and Contraction of 319 Aluminum Alloys
by: Wu, Ying-Chang, et al.
Published: (1997)

Assessment of Thermodynamic Stability of Reinforcements in Aluminum Alloy Melts
by: Zheng, Qingjun, et al.
Published: (2003-02-01)

Comparative Study on Wettability of Typical Plant Leaves and Biomimetic Preparation of Superhydrophobic Surface of Aluminum Alloy
by: Sun Yanhong, et al.
Published: (2018-01-01)

Comparative Study on Wettability of Typical Plant Leaves and Biomimetic Preparation of Superhydrophobic Surface of Aluminum Alloy
by: Sun Yanhong, et al.
Published: (2018-01-01)

Valorization of Aluminum Dross with Copper via High Temperature Melting to Produce Al-Cu Alloys
by: Artur Kudyba, et al.
Published: (2021-07-01)

Characterization of aluminum alloy 2618 and its composites containing alumina particles
by: Oguocha, Ikechukwuka N. A.
Published: (1999)

Studies on the Friction Stir Lap Welding of Aluminum Alloy to Alumina Plates
by: Chia-cheng Lin, et al.
Published: (2016)

Wettability in the liquid Cu-Ag alloy – fireproof material – gas phase system
by: G. Siwiec, et al.
Published: (2013-07-01)

INFLUENCE OF TEMPERATURE REGIME OF MELTING ON CHARACTERISTICS OF CAST ALIMINIUM ALLOYS
by: I. V. Rafalski, et al.
Published: (2005-05-01)

Casting house of ОАО “KEMZ”. Plasma melting of aluminum alloys
by: S. A. Gaevskij
Published: (2003-05-01)

Formation of Fractal Dendrites by Laser-Induced Melting of Aluminum Alloys
by: Alexey Kucherik, et al.
Published: (2021-04-01)

Study on Strengthening and Toughening Mechanisms of Aluminum Alloy 2618-Ti at Elevated Temperature
by: Kun Ma, et al.
Published: (2018-01-01)

Effects of Temperature, Time, Magnesium, and Copper on the Wettability of Al/TiC System
by: Halil Ibrahim Kurt, et al.
Published: (2015-01-01)

Wettability and pressurized infiltration of ceramic powder compacts by metallic melts
by: Candan, Ercan
Published: (1998)

Effects of Titanium and Rare Earth Elements Additions on the Brazing of Aluminum Alloys and Alumina
by: Guo-Jhan Jhang, et al.
Published: (2013)

Effect of Ni-Cr Alloy Surface Abrasive Blasting on Its Wettability by Liquid Ceramics
by: Weronika Czepułkowska-Pawlak, et al.
Published: (2021-04-01)

<em>In-situ </em>reactions in hybrid aluminum alloy composites during incorporating silica sand in aluminum alloy melts
by: Benjamin F. Schultz, et al.
Published: (2016-07-01)

Preparation of nanoporous anodic alumina by anodization of aluminum
by: Min-Tao Wu, et al.
Published: (2005)

Preparation and Characterization of Alumina Nitride Powders using Waste Aluminum Electrolytic Liquid
by: Chen, Yong-Xuan, et al.
Published: (2017)

A Review on the Electrodeposition of Aluminum and Aluminum Alloys in Ionic Liquids
by: Kranthi Kumar Maniam, et al.
Published: (2021-01-01)

Parametric Research of Selective Laser Melting with Aluminum-Silicon Alloy Powders
by: Wei-LinSU, et al.
Published: (2017)

Corrosion Behaviors of Selective Laser Melted Aluminum Alloys: A Review
by: Hongwei Chen, et al.
Published: (2020-01-01)

Study on Washout Resistance of Mold steel Coatings in Aluminum Alloy Melt
by: Lu-Jun-Yu, et al.
Published: (2011)

Selective Laser Melting of Ti-45Nb Alloy
by: Holger Schwab, et al.
Published: (2015-04-01)

Influence of Scanning Strategies on Processing of Aluminum Alloy EN AW 2618 Using Selective Laser Melting
by: Daniel Koutny, et al.
Published: (2018-02-01)

Studies on the Friction Stir Welding Characteristics of Aluminum Alloy and Alumina Ceramic Clad Plate
by: Yu-Yin Huang, et al.
Published: (2019)

A comparison of the aging kinetics of a cast alumina-6061 aluminum composite and a monolithic 6061 aluminum alloy.
by: Hafley, Johanna L.
Published: (2013)

An investigation of the effect of steam cleaning and aluminum oxide treatment on the wettability and surface free energy of alloys commonly used in dentistry
by: Sutton, Kirk C.
Published: (2016)

Cannot write session to /tmp/vufind_sessions/sess_1jabjqfadatog6st9a3upe3uu4