On the impact response of three-dimensional two-step braided hybrid composites

On the impact response of three-dimensional two-step braided hybrid composites

碩士 === 國立成功大學 === 航空太空工程學系 === 81 ===

Bibliographic Details
Main Authors:	Wei.C. Chen, 陳偉成
Other Authors:	S. T. Jenq
Format:	Others
Language:	zh-TW
Published:	1993
Online Access:	http://ndltd.ncl.edu.tw/handle/43719143616717536039

Similar Items

Matrix Algorithm for Braiding Simulation of Three-Dimensional Four-Step Braided Composites
by: Xin Ma, et al.
Published: (2016-01-01)

A study of two dimensional braided composites
by: Yan, Yong
Published: (1998)

The Crushing characteristics of Three-Dimensional Braiding Composite Tubes
by: Wu, Chang Mou, et al.
Published: (1994)

Experimental and Numerical Studies on Ballistic Limite of Two- Step Braided Composites
by: G. J. Mo, et al.
Published: (1994)

The Elastic and Damage Behavior of the Three-Dimensional Braided Composites Using Pultruded Rods as Reinforcements
by: Chen, Horn-I, et al.
Published: (1996)

Longitudinal Compressive Property of Three-Dimensional Four-Step Braided Composites after Cyclic Hygrothermal Aging under High Strain Rates
by: Kailong Xu, et al.
Published: (2020-03-01)

The Fabrication of Three - Dimensional I - Beam Braids and the Flexural Behavior of Their Composites
by: An,Ta Chung, et al.
Published: (1993)

Numerical simulation of electromechanical coupling properties of three-dimensional braiding piezoelectric composite actuator
by: Xiaoqing Sun, et al.
Published: (2021-04-01)

Effects of Temperature on Bending Properties of Three-Dimensional and Five-Directional Braided Composite
by: Peng Li, et al.
Published: (2019-11-01)

Impact Simulation and Experiment of Braided Composite Tubes
by: Xin-Hua Chen, et al.
Published: (2015)

Modeling and Two-Step Homogenization of Aperiodic Heterogenous 3D Four-Directional Braided Composites
by: Vivek Kumar Dhimole, et al.
Published: (2020-11-01)

Mesomechanical Model for Failure Study of Two Dimensional Triaxial Braided Composite Materials
by: Li, Xuetao
Published: (2010)

Experimental Investigation on Low-velocity Impact and Compression After Impact Properties of Three-dimensional Five-directional Braided Composites
by: YAN Shi, et al.
Published: (2017-12-01)

Predication and Experimental Verification on Mechanical Properties of Three-dimensional and Four-direction Braided Composites
by: XU Shan-ying, et al.
Published: (2018-06-01)

Damage detection of three-dimensional braided composite materials using carbon nanotube thread
by: Wan Zhenkai, et al.
Published: (2017-03-01)

Location of Tensile Damage Source of Carbon Fiber Braided Composites Based on Two-Step Method
by: Gang Ding, et al.
Published: (2019-09-01)

the effect of square cut-out on the natural frequencies and mode shape of two-step braided composites
by: Jyh-Cheung Yu, et al.
Published: (1995)

Braid CAM: Braided composite analytical model
by: Garrett W. Melenka, et al.
Published: (2018-01-01)

MULTISCALE HYBRID ELEMENT MODELING OF TRIAXIAL BRAIDED COMPOSITE
by: Sun, Mingkun, Sun
Published: (2018)

Experimantal and Numerical Studies on Ballistic Limite of Four- Step Braided Composites
by: C. T. Kuo, et al.
Published: (1995)

ACOUSTIC EMISSION BASED DEFECTS MONITORING OF THREE-DIMENSIONAL BRAIDED COMPOSITES USING WAVELET NETWORK
by: Su Hua, et al.
Published: (2016-06-01)

Analysis of the Flexural Behavior of Three-Dimensional Braided Composite I-Beams by the Finite Element Method
by: 郭智銘
Published: (1995)

Progressive damage visualization and tensile failure analysis of three-dimensional braided composites by acoustic emission and micro-CT
by: Wei Zhou, et al.
Published: (2021-01-01)

Characterization of damage mechanisms and behavior in two-dimensionally braided composites subjected to static and fatigue loading
by: Burr, Scott T.
Published: (2014)

Pull-Out Strength of Fiberglass/Epoxy Composite RebarFabricated on a Three-Dimensional Braiding Machine
by: Machanzi, Tarisai
Published: (2017)

Characteristic analysis of carbon nanotube thread embedded into three-dimensional braided composite under bending load
by: Guo Jian-Min, et al.
Published: (2017-09-01)

Pull-Out Strength of Fiberglass/Epoxy Composite RebarFabricated on a Three-Dimensional Braiding Machine
by: Machanzi, Tarisai
Published: (2017)

Analysis and Prediction of Braiding-Aluminum Hybrid Composite tubes properties
by: Ni-Hui Shen, et al.
Published: (2004)

Buckling of Braided Composite Plates with Two Rectangular Holes
by: hung-chih-tsai, et al.
Published: (2014)

Analysis of the Fexural Behavior of Three-Dimensional Braided Composite I-Beams with Different Flanges by the Finite Element Method
by: Tsai, Hung-Bin, et al.
Published: (1996)

A model for longitudinal tensile strength prediction of low braiding angle three-dimensional and four-directional composites
by: Hui Yuan, et al.
Published: (2017-05-01)

Impact Fracture of Braided Carbon/PU Composite Tube
by: CHANG,YU-CHUAN, et al.
Published: (2016)

Impact Fracture of Foam-Filled Braided Composite Tube
by: Yu, Hui-Lun, et al.
Published: (2017)

Systematic Approach to Simulating Impact for Triaxially Braided Composites
by: Blinzler, Brina J.
Published: (2012)

Development of Hybrid Braided Composite Rods for Reinforcement and Health Monitoring of Structures
by: Sohel Rana, et al.
Published: (2014-01-01)

Static and Dynamic Crush Behavior of Braid/Aluminum Hybrided Composite Tubes
by: Xu, Zhi-Zhong, et al.
Published: (1998)

Fatigue Damage Behavior of Carbon Braid-Aluminum hybrided Composite Tubes
by: 張勝松
Published: (1999)

Composite circular braid mechanics
by: Hopper, Robert Huston
Published: (2014)

Study on Properties Prediction and Braiding Optimization of Axial Braided Carbon/Carbon Composite
by: Chunguang Wang, et al.
Published: (2020-06-01)

High Temperature Mechanical Response and Failure Analysis of 3D Five-Directional Braided Composites with Different Braiding Angles
by: Hong-mei Zuo, et al.
Published: (2019-10-01)