The effect of the worn cutting fool on quasi-steady-state stress distributions of the machined workpiece

The effect of the worn cutting fool on quasi-steady-state stress distributions of the machined workpiece

碩士 === 國立臺灣科技大學 === 工程技術研究所 === 74 ===

Bibliographic Details
Main Author:	鄧新掙
Other Authors:	Xiao, Shui-Yin
Format:	Others
Language:	zh-TW
Published:	1986
Online Access:	http://ndltd.ncl.edu.tw/handle/16517635235389316066

Similar Items

Analysis on the calculation of temperature rise for orthogonal cutting of single-crystal silicon workpiece by quasi-steady molecular statics nanoscale cutting model
by: Meng-hua Lin, et al.
Published: (2011)

A study on the residual stresses of the machined workpiece and the effect of the thermal load on of the stresses of the machined workpiece
by: 林有鎰
Published: (1987)

Predicting malfunction in quasi steady state rotating machines
by: Kitsos, Christos
Published: (2007)

An experimental study of the workpiece temperature on the machined surface during metal cutting
by: Chu, Tien-Hsiung
Published: (1997)

Temperature rise of the workpiece in metal cutting
by: Hablanian, M. H
Published: (2012)

DIAGNOSTICS OF WORKPIECE SURFACE CONDITION BASED ON CUTTING TOOL VIBRATIONS DURING MACHINING
by: Jerzy Józwik, et al.
Published: (2015-05-01)

Study of An Evaluation of Surface Roughness on Cutting Workpiece
by: Huang ,Jiann Rung, et al.
Published: (1995)

Morphological Analysis of KDP-Crystal Workpiece Surfaces Machined by Ultra-Precision Fly Cutting
by: Dongju Chen, et al.
Published: (2020-01-01)

Quasi steady-state hurricanes revisited
by: John Persing, et al.
Published: (2019-03-01)

Roughness measurements of machined workpieces
by: Ward, R. L.
Published: (1992)

The effects of piezoelectric vibration assisted cutting of the workpiece surface precision
by: HSIANG-WEI,HSIEH, et al.
Published: (2014)

Performance of Cut-Off Wheels during Elastic Abrasive Cutting of Rotating Workpieces
by: Gancho Ganev, et al.
Published: (2019-01-01)

The quasi-steady state of the valley wind system
by: Juerg eSchmidli, et al.
Published: (2015-12-01)

Quasi-steady state aerodynamics of the cheetah tail
by: Amir Patel, et al.
Published: (2016-08-01)

Engineering Residual Stress into the Workpiece through the Design of Machining Process Parameters
by: Hanna, Carl Robert
Published: (2008)

The effect of workpiece temperature on the performance of the machining of FRP
by: Wang, Gwo Dong, et al.
Published: (1997)

Experimental study on cutting parameters and machining paths of SiC/Al composite thin-walled workpieces
by: Yunan Liu, et al.
Published: (2020-08-01)

Influence of the cutting parameters on the workpiece temperature during face milling
by: Nowakowski Lukasz, et al.
Published: (2017-01-01)

Determination of Cutting Forces in Grinding with Crossed Axes of Tool and Workpiece
by: Kalchenko Volodimyr, et al.
Published: (2017-03-01)

Fool's gold
by: Cotten, Nicole
Published: (2018)

Play the Fool
by: Martinez, Daniel
Published: (2018)

God's Fools
by: Baker, Bruce D.
Published: (1975)

The Computer as Fool
by: David Williams
Published: (1983-04-01)

Into the Fool’s Mind
by: Mihaela Michailov
Published: (2008-12-01)

Fool Factory
by: Sundin, Jan-Erik, et al.
Published: (2003)

Shakespeare's fools
by: Clark, Edith Jarvis
Published: (2016)

The fool's tale
by: Rubin, Abba
Published: (2011)

Ship of Fools
by: Williams, Daniel T
Published: (2016)

The Journey of the Fool
by: Sullivan, Ellen Mowson
Published: (2014)

Cutting behavior simulation of CMP particle by using quasi-steady molecular statics model
by: Ming-long Huang, et al.
Published: (2007)

Control of the quasi-steady state in fed-batch fermentation
by: Kalogerakis, Nicolas.
Published: (1979)

Bioequivalence study with quasi-steady state dosing regimen
by: 陳元奇
Published: (1992)

A coaxial quasi-steady state plasma accelerator
by: Chambers, Richard Gavin
Published: (1970)

The Effect of Workpiece Temperature on The Machining of Metal Matrix Composites
by: Lin ,Chia-Home, et al.
Published: (1995)

Computation and verification of workpiece shape in electrochemical machining
by: Nanayakkara, M. B.
Published: (1977)

Stability of Steady States and Steady-State Limit of Elastoplastic Trusses under Quasi-Static Cyclic Loading
by: Araki, Yoshikazu
Published: (2009)

The humility of holy fools in Orthodox Christianity: On the problem of understanding (The Vita of Simeon the Holy Fool and The Vita of Andrew the Holy Fool)
by: Dorofeeva L.
Published: (2014-07-01)

Playing the Female Fool: Metamorphoses of the Fool from Fireworks to The Bloody Chamber
by: Cristina Di Maio
Published: (2020-11-01)

Influence of the Cutting Strategy on the Temperature and Surface Flatness of the Workpiece in Face Milling
by: Nowakowski Lukasz, et al.
Published: (2020-10-01)

Investigation of Stress-Strain State of the Workpiece at Gauge Burnishing of its Holes
by: Štefan Václav, et al.
Published: (2017-09-01)