A STUDY OF STRESS DISTRIBUTION AROUND A SINGLE SPOT NUGGET UNDER STATIC TENSILE SHEAR LOADING

A STUDY OF STRESS DISTRIBUTION AROUND A SINGLE SPOT NUGGET UNDER STATIC TENSILE SHEAR LOADING

碩士 === 國立中山大學 === 機械工程研究所 === 74 ===

Bibliographic Details
Main Authors:	LIU, AN-XUAN, 劉安炫
Other Authors:	GUANG, ZHUO-HUA
Format:	Others
Language:	zh-TW
Published:	1986
Online Access:	http://ndltd.ncl.edu.tw/handle/38299069168970491790

Similar Items

Load distributions in bolted single lap joints under non-central tensile shear loading
by: Chaiwat Sinthusiri, et al.
Published: (2021-06-01)

Axisymmetric nugget growth during resistance spot welding
by: HE, GING-YAN, et al.
Published: (1988)

An investigation of nugget formation and simulation in resistance spot welding
by: Obert, Richard M. (Richard Matthew), 1977-
Published: (2005)

Assessment of Nugget Size of Spot Weld using Neutron Radiography
by: Triyono, et al.
Published: (2011-08-01)

The Research of Microstructure Characteristic and Tensile Shear Failure Load of Friction-Stir-Spot-Welded Al-Mg Alloy
by: Chia-WeiLin, et al.
Published: (2011)

Evaluation of Shear Stress Transport, Large Eddy Simulation and Detached Eddy Simulation for the Flow around a Statically Loaded Tire
by: Haichao Zhou, et al.
Published: (2021-07-01)

Experimental Study of Brazilian Tensile Strength of Concrete Under Static Loads
by: Li Rui, et al.
Published: (2020-01-01)

Microstructure and Tensile-Shear Properties of Resistance Spot-Welded Medium Mn Steel
by: Qiang Jia, et al.
Published: (2018-01-01)

Stress Concentration Factors for Welded Plate T-Joints Subjected to Tensile, Bending, and Shearing Loads
by: Krzysztof L. Molski, et al.
Published: (2021-01-01)

Stress Concentration Factors for Butt-Welded Plates Subjected to Tensile, Bending and Shearing Loads
by: Krzysztof L. Molski, et al.
Published: (2020-04-01)

An investigation of the factors influencing the distribution of splitting stress around tensile lapped splices
by: Jones, Keith G. Joes
Published: (1993)

OPTIMIZATION OF PROCESS PARAMETERS ON TENSILE SHEAR LOAD OF FRICTION STIR SPOT WELDED ALUMINUM ALLOY (AA5052-H112)
by: Armansyah Armansyah, et al.
Published: (2018-10-01)

The Corrosion Characteristics and Tensile Behavior of Reinforcement under Coupled Carbonation and Static Loading
by: Yidong Xu
Published: (2015-12-01)

Nutri Nuggets
by: Asencios Espinoza, Valeria Andrea, et al.
Published: (2021)

Dynamic tensile behaviour and crack propagation of coal under coupled static-dynamic loading
by: Xianjie Hao, et al.
Published: (2020-09-01)

Transport Phenomena during Nugget Growth with Mushy-zone Phase Change in Resistance spot Welding
by: Lin, Menq Shyan, et al.
Published: (1994)

Factors affecting nugget growth with mushy-zone phase change during resistance spot welding
by: YE,FENG-BIN, et al.
Published: (1990)

The role of liquid feeding in nugget-edge cracking in resistance spot welding of dissimilar magnesium alloys
by: Yu Zhang, et al.
Published: (2021-05-01)

Influence of Tensile Speeds on the Failure Loads of the DP590 Spot Weld under Various Combined Loading Conditions
by: Jung Han Song, et al.
Published: (2015-01-01)

Nuggets 7 Heaven
by: Mora Mallqui, Camila Marianela, et al.
Published: (2020)

Abstracts, Golden Nugget
Published: (2014-02-01)

Seven seeds nuggets
by: Balandra Ruiz, Allison Nicole, et al.
Published: (2021)

Residual Stress Distribution Changes During Dynamic Unidirectional Tensile Loading
by: Todd, Henry Swan
Published: (1965)

Comparative Shear Tests of Bolt Rods Under Static and Dynamic Loading
by: Pytlik Andrzej
Published: (2020-06-01)

Spiral shear reinforcement for concrete structures under static and seismic loads
by: Jaafar, Kamal Rachid
Published: (2004)

Numerical model of cracking pattern in laminated bamboo specimens under tensile and shear loads
by: Martín Estrada, et al.
Published: (2019-03-01)

Numerical model of cracking pattern in laminated bamboo specimens under tensile and shear loads
by: M. Estrada, et al.
Published: (2019-04-01)

Aggregate Effect on the Concrete Cone Capacity of an Undercut Anchor under Quasi-Static Tensile Load
by: Marco Marcon, et al.
Published: (2018-05-01)

Design and Switching Transient Analysis of Static Capacitor Banks in a Distribution System
by: liu an, et al.
Published: (1996)

The effect of initial deflection on the stress distribution in a panel of ship's plating under tensile load
by: Haskell, Arthur Jacob, et al.
Published: (2013)

In Situ Characterization of Damage Development in Cottonid Due to Quasi-Static Tensile Loading
by: Ronja Scholz, et al.
Published: (2020-05-01)

DEFORMATION CHARACTERISTICS OF CHOPPED FIBRE COMPOSITES SUBJECTED TO QUASI-STATIC TENSILE LOADING
by: Jan Šleichrt, et al.
Published: (2016-02-01)

Prediction of the optimum tensile – shear strength through the experimental results of similar and dissimilar spot welding joints
by: Mahmood Najmuldeen Yousif
Published: (2020-06-01)

Effectives of Spot Welding Condition on Microstructure and Tensile-Shear Strength Variations of 6061-T6 Aluminum Alloy
by: morgan huang, et al.
Published: (2001)

COMPARISON OF FAILURE CRITERIA FOR WOOD IN TENSILE-SHEAR STRESS STATE
by: Eliška Šmídová, et al.
Published: (2017-11-01)

Shear behavior of reinforced concrete deep beams under static and dynamic loads
by: Shahnewaz, Md
Published: (2013)

Shear behavior of reinforced concrete deep beams under static and dynamic loads
by: Shahnewaz, Md
Published: (2013)

Experimental analysis of the confined behavior of concrete under static and dynamic shear loading
by: Abdul rahman, Reem
Published: (2018)

Shear behavior of reinforced concrete deep beams under static and dynamic loads
by: Shahnewaz, Md
Published: (2013)

Omphalolith: A nugget in the navel
by: Sabha Mushtaq
Published: (2021-01-01)